Not getting bootloader installed with CentOS 8 + mdraid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I am trying to use a kickstart to install CentOS 8.2 on a server with a
pair of drives with Linux software RAID 1.  The install completes, but
the resulting system will not boot - I get "Booting from Hard drive C:"
from the BIOS (Dell in legacy BIOS mode, not UEFI) and it stops.  If I
then start the installer in rescue mode and run grub2-install on the two
drives, it boots okay.

If I take out the RAID config and just install on the first drive, it
boots fine - it appears to just be an issue with RAID.  I tried my
kickstart in a KVM VM with two disks, and it works there (I get RAID and
a bootloader).

Anybody else run into this?  Any ideas?  I've been installing from
kickstarts for ages, including software RAID, but not CentOS 8 with
software RAID until now.

-- 
Chris Adams <linux@xxxxxxxxxxx>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux