Re: Mounting CIFS shares on C8

[Chris Schanzle via CentOS <centos@xxxxxxxxxx>]

On 4/3/20 12:48 PM, Patrick DERWAEL wrote:
> User & pass are present
> According to the man pages, workgroup is supported
> I have changed it to domain, but that didn't change a thing
>
> [root@plexvm ~]# cat /etc/fstab
>
> #
> # /etc/fstab
> # Created by anaconda on Fri Apr  3 14:02:23 2020
> #
> # Accessible filesystems, by reference, are maintained under '/dev/disk/'.
> # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info.
> #
> # After editing this file, run 'systemctl daemon-reload' to update systemd
> # units generated from this file.
> #
> /dev/mapper/cl_plexvm-root /                       xfs     defaults
>   0 0
> UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot                   ext4
>   defaults        1 2
> /dev/mapper/cl_plexvm-swap swap                    swap    defaults
>   0 0
> //192.168.1.200/mp3     /home/plex/Musique      cifs
>   user=plex,pass=plex,domain=DERWAEL,ro,auto,vers=3.0
> #//192.168.1.200/videos /home/plex/Vidéos       cifs
>   user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> #//192.168.1.200/series /home/plex/Séries       cifs
>   user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> [root@plexvm ~]# systemctl daemon-reload
> [root@plexvm ~]# mount -a
> mount error(2): No such file or directory
> Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
> [root@plexvm ~]#
>
> Le ven. 3 avr. 2020 à 18:23, Leon Fauster via CentOS <centos@xxxxxxxxxx> a
> écrit :
>
> > Am 03.04.20 um 18:01 schrieb Patrick DERWAEL:
> > > Le ven. 3 avr. 2020 à 17:54, Jonathan Billings <billings@xxxxxxxxxx> a
> > > écrit :
> > >
> > > > On Fri, Apr 03, 2020 at 04:00:42PM +0200, Patrick DERWAEL wrote:
> > > > > //192.168.1.200/mp3     /home/plex/Musique      cifs
> > > > >    user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> > > > > //192.168.1.200/videos  /home/plex/Vidéos       cifs
> > > > >    user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> > > > > //192.168.1.200/series  /home/plex/Séries       cifs
> > > > >    user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> > > > Try removing non-ascii characters from your mountpoints and try again.
> > > >
> > > > --
> > > > Jonathan Billings <billings@xxxxxxxxxx>
> > > > _______________________________________________
> > > > CentOS mailing list
> > > > CentOS@xxxxxxxxxx
> > > > https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.centos.org%2Fmailman%2Flistinfo%2Fcentos&amp;data=02%7C01%7Cchristopher.schanzle%40nist.gov%7C50e5520598c94cdebfc708d7d7eefb64%7C2ab5d82fd8fa4797a93e054655c61dec%7C1%7C0%7C637215293735011190&amp;sdata=jVoqTxBRGNNfP7%2BWZCRP%2Fbb5vQ9RdErHznttq5wkWH8%3D&amp;reserved=0
> > > I have commented out the 2 mounts with non-ascii... that didn't help...
> > >
> > >
> > > [root@plexvm ~]# cat /etc/fstab
> > >
> > > #
> > > # /etc/fstab
> > > # Created by anaconda on Fri Apr  3 14:02:23 2020
> > > #
> > > # Accessible filesystems, by reference, are maintained under
> > '/dev/disk/'.
> > > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more
> > info.
> > > #
> > > # After editing this file, run 'systemctl daemon-reload' to update
> > systemd
> > > # units generated from this file.
> > > #
> > > /dev/mapper/cl_plexvm-root /                       xfs     defaults
> > >    0 0
> > > UUID=f7c4e0e2-703e-4e61-8d7a-0aa34f836b02 /boot                   ext4
> > >    defaults        1 2
> > > /dev/mapper/cl_plexvm-swap swap                    swap    defaults
> > >    0 0
> > > //192.168.1.200/mp3     /home/plex/Musique      cifs
> > >    user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> > > #//192.168.1.200/videos /home/plex/Vidéos       cifs
> > >    user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> > > #//192.168.1.200/series /home/plex/Séries       cifs
> > >    user=plex,pass=plex,workgroup=DERWAEL,ro,auto,vers=3.0
> > > [root@plexvm ~]# mount -a
> > > mount error(2): No such file or directory
> > > Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
> > > [root@plexvm ~]#
> >    username=value
> >    password=value
> >    domain=value
> >
> > ?
> >
> > --


Instead of user=, try username=.  mount.cifs(8) states:

   While some versions of the cifs kernel module accept user= as an abbreviation for this option, its use can confuse the standard mount program into thinking that this is a non-superuser mount. It is therefore recommended to use the full username= option name.


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos