Re: UEFI and PXE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Chris Adams writes:
> Once upon a time, isdtor <isdtor@xxxxxxxxx> said:
> > 11:06:51.413549 IP (tos 0x10, ttl 128, id 0, offset 0, flags [none], proto UDP (17), length 390)
> >     10.1.2.2.67 > 255.255.255.255.68: [udp sum ok] BOOTP/DHCP, Reply, length 362, xid 0x4007adc6, Flags [Broadcast] (0x8000)
> >           Your-IP 10.1.2.57
> >           Server-IP 10.1.2.1                                      <--
> >           Client-Ethernet-Address 00:1b:21:d8:69:1c
> >           file "linux-install/bootx64.efi"
> >           Vendor-rfc1048 Extensions
> >             Magic Cookie 0x63825363
> >             DHCP-Message Option 53, length 1: ACK
> >             Server-ID Option 54, length 4: 10.1.2.2
> >             Lease-Time Option 51, length 4: 43200
> >             Subnet-Mask Option 1, length 4: 255.255.255.0
> >             Default-Gateway Option 3, length 4: 10.1.2.250
> >             Domain-Name-Server Option 6, length 8: 10.1.2.2
> >             Hostname Option 12, length 5: "client"
> >             Domain-Name Option 15, length 20: "foo.bar.com"
> >             NTP Option 42, length 8: 10.1.2.2
> >             RN Option 58, length 4: 21600
> >             RB Option 59, length 4: 37800
> >             TFTP Option 66, length 11: "10.1.2.1"                 <--
> >             END Option 255, length 0
> 
> I do see a couple of differences - main one is that my boot file is in
> option 67, not the BOOTP "file" field.  Also, my option 66 is a
> hostname, not an IP.  I don't know how you tell ISC DHCP to use option
> 67 instead of the file field, but maybe that could trigger different
> client behavior?
> 
> More odd is that dnsmasq is adding a null terminator to both options 66
> and 67.  My UEFI PXE clients seem to accept it just fine though.

Yes, it looks like I'm out of luck and need to find a newer machine to test this with. Moving the tftp server works to an extent - server boots right into a grub prompt.

I went over the linux-poweredge archives and found this:

https://lists.us.dell.com/pipermail/linux-poweredge/2015-May/049810.html

In particular:
| 2.      Don't waste time w/ a R*10, the UEFI PXE boot code is buggy!  It misinterprets the NBP filename (DHCP option 67).  That's an old Intel bug; they fixed it years ago in their BIOS PXE implementation.  I'm guessing it was resurrected in their UEFI PXE implementation.
| 
| Most all NIC vendors (Intel, Broadcom, etc) use the Intel reference implementation for PXE.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux