Hi, We have a Dell server with 4 Ethernet interface. I would to aggregate them in a bond. Everything work but the default gateway doesn’t work on the « bond0 » interface and I have no links. My configuration: - CentOS 7: :/etc/sysconfig/network-scripts# uname -a Linux nas-mtd2 3.10.0-957.5.1.el7.x86_64 #1 SMP Fri Feb 1 14:54:57 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux - NetworkManager disabled: :/etc/sysconfig/network-scripts# systemctl list-unit-files | grep NetworkManager NetworkManager-dispatcher.service disabled NetworkManager-wait-online.service disabled NetworkManager.service disabled - ifcfg-em1 to em4 (they are identical): :/etc/sysconfig/network-scripts# cat ifcfg-em2 NAME=bond0-slave[1 to 4] DEVICE=em[1 to 4] TYPE=Ethernet BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes NM_CONTROLLED=no - the bond0 declaration: :/etc/sysconfig/network-scripts# cat ifcfg-bond0 DEVICE=bond0 TYPE=Ethernet BONDING_MASTER=yes BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no # IP IPADDR=172.16.1.128 PREFIX=16 GATEWAY=172.16.0.254 # Bonding BONDING_OPTS="mode=802.3ad ad_select=stable use_carrier=1 miimon=100 arp_ip_target=172.16.1.128 updelay=100 lacp_rate=fast" USERCTL=no After a « systemctl restart network »: :/etc/sysconfig/network-scripts# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:0e brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff inet 172.16.1.128/16 brd 172.16.255.255 scope global bond0 valid_lft forever preferred_lft forever And the route command: :/etc/sysconfig/network-scripts# ip r default via 172.16.0.254 dev bond0 169.254.0.0/16 dev bond0 scope link metric 1006 169.254.0.0/16 dev bond0.10 scope link metric 1008 172.16.0.0/16 dev bond0 proto kernel scope link src 172.16.1.128 but their is no network connection on « bond0 »! The only way I found to have a network active connection is keeping my first interface outside the bond and having the default route on this one! In this case I have a specific IP to it and a bond one on bound. As I must have also a VLAN connection on the bound, I have create a « ifcfg-bond0.10 » file: :/etc/sysconfig/network-scripts# cat ifcfg-bond0.10 NAME=bond0.10 DEVICE=bond0.10 #TYPE="Ethernet" VLAN=yes NM_CONTROLLED=no ONPARENT=yes DEFROUTE="no" # IP IPADDR=XXX.XXX.XXX.142 NETMASK=255.255.255.0 NETWORK=XXX.XXX.XXX.0 BROADCAST=XXX.XXX.XXX.255 PREFIX=24 GATEWAY=1XXX.XXX.XXX.126 With that and the first Ethernet interface on a specific address I have: :/etc/sysconfig/network-scripts# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether d0:94:66:65:32:0e brd ff:ff:ff:ff:ff:ff inet 172.16.1.86/16 brd 172.16.255.255 scope global em1 valid_lft forever preferred_lft forever 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff inet 172.16.1.128/16 brd 172.16.255.255 scope global bond0 valid_lft forever preferred_lft forever 8: bond0.10@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether d0:94:66:65:32:10 brd ff:ff:ff:ff:ff:ff inet XXX.XXX.XXX.142/24 brd XXX.XXX.XXX.255 scope global bond0.10 valid_lft forever preferred_lft forever :/etc/sysconfig/network-scripts# ip r default via 172.16.0.254 dev em1 169.254.0.0/16 dev em1 scope link metric 1002 169.254.0.0/16 dev bond0 scope link metric 1006 169.254.0.0/16 dev bond0.10 scope link metric 1008 172.16.0.0/16 dev em1 proto kernel scope link src 172.16.1.86 172.16.0.0/16 dev bond0 proto kernel scope link src 172.16.1.128 XXX.XXX.XXX.0/24 dev bond0.10 proto kernel scope link src XXX.XXX.XXX.142 And everything is working. But… I am not satisfy. Is it normal? Is it a way to have all the Ethernet link on a bond? Your help is needed :-) Best wishes -- Pierre Malard « Si l'on veut croire en l'humanité, il faut voir et comprendre l'inhumanité » |\ _,,,---,,_ /,`.-'`' -. ;-;;,_ |,4- ) )-,_. ,\ ( `'-' '---''(_/--' `-'\_) πr perl -e '$_=q#: 3|\ 5_,3-3,2_: 3/,`.'"'"'`'"'"' 5-. ;-;;,_: |,A- ) )-,_. ,\ ( `'"'"'-'"'"': '"'"'-3'"'"'2(_/--'"'"' `-'"'"'\_): 24πr::#;y#:#\n#;s#(\D)(\d+)#$1x$2#ge;print' - --> Ce message n’engage que son auteur <--
Attachment:
signature.asc
Description: Message signed with OpenPGP
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx https://lists.centos.org/mailman/listinfo/centos