Re: Can't boot into GUI: Centos 7 "Server with GUI" option

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Jay Hart wrote:
> 
> I'm setting up a new server on Centos 7, running x86_64. Motherboard is a MITAC PD11BICC, running
> Indian Bay Trail, with a i915 chipset.
> 
> I installed "Server with GUI", but when it boots I get the "blank screen with a cursor" issue.
> 
> Decided to see about disabling the i915 driver, by blacklisting it. but I don't think I have the
> right commands, as when I did that, it appeared on the reboot the i915 driver was still active.
> 
> vi /etc/modprobe.d/blacklist_i915.conf
> added the following line to that file
>     blacklist i915
> Saved the file. Rebooted.
> 
> The driver seemed to active upon the reboot.
> 
> Can someone tell me if this is the correct and full procedure to get rid of this driver.

It is probably being loaded by the initramfs image on boot

If you rebuild the initramfs (which you can do by just running 
'dracut'), it should honour the current 'blacklist' settings in 
/etc/modprobe.d/

James Pearson
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux