This is happening with the Centos7-armv7 image 1804, but I was wondering
if it is a broader C7 issue.
My image has only 2 ifcfg files: ifcfg-l0 and -link. 'ip a' is listing
the ethernet as eth0. ifcfg-link has contains:
DEVICE=link
BOOTPROTO=dhcp
ONBOOT=on
I then used nmcli to create my ifcfg-eth0
nmcli con delete eth0
nmcli con add type ethernet con-name eth0 ifname eth0 ip4
192.168.129.11/25 gw4 192.168.129.1
nmcli con mod eth0 ipv4.dns "50.253.254.2 192.168.129.1"
nmcli con mod eth0 mac "02:67:15:00:81:0B"
I moved the cable to the 192.168.129.1 vlan (which does not have a dhcp
server), and
nmcli con up eth0
Error: Connection activation failed: No suitable device found for this
connection.
Oops. ?
rebooting did not help. Came up with no address for interface eth0, yet
no suitable device.
Where would I look to find what may be happening here?
I appreciate that this may be specific to armv7 and my Cubieboard2, but
then again, it may be something known by other Centos people.
Thanks for any help!
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
