Maybe not a good assumption afterall --
I can no longer boot using kernel 3.10.0-514 or 3.10.0-862.
boot.log shows:
Dependency failed for /mnt/data
Dependency failed for Local File Systems
Dependency failed for Mark the need to relabel after reboot.
Dependency failed for Migrate local SELinux policy changes from the
old store structure to the new structure.
Dependency failed for Relabel all filesystems, if necessary.
On Sat, Jul 14, 2018 at 12:55 PM Mike <1100100@xxxxxxxxx> wrote:
>
> I did the following test:
>
> ###############################################
> 1.
>
> Computer with Centos 7.5 installed on hard drive /dev/sda.
>
> Added two hard drives to the computer: /dev/sdb and /dev/sdc.
>
> Created a new logical volume in RAID-1 using RedHat System Storage Manager:
>
> ssm create --fstype xfs -r 1 /dev/sdb /dev/sdc /mnt/data
>
> Everything works.
> /dev/lvm_pool/lvol001 is mounted to /mnt/data.
> Files and folders can be copied/moved, read/written on /mnt/data.
>
> ###############################################
>
> 2.
>
> I erased CentOS 7.5 from /dev/sda.
> Wrote zeros to /dev/sda using dd.
> Reinstalled CentOS 7 on /dev/sda.
> Completed yum update - reboot - yum install system-storage-manager.
>
> RedHat system storage manager listed all existing volumes on the computer:
>
> [root@localhost]# ssm list
>
> --------------------------------------------------------------------------------------
> Volume Pool Volume size FS FS size Free
> Type Mount point
> --------------------------------------------------------------------------------------
> /dev/cl/root cl 65.00 GB xfs 64.97 GB 63.67 GB
> linear /
> /dev/cl/swap cl 8.00 GB
> linear
> /dev/lvm_pool/lvol001 lvm_pool200.00 GB xfs 199.90 GB 184.53 GB
> raid1 /mnt/data
> /dev/cl/home cl 200.00 GB xfs 199.90 GB 199.87 GB
> linear /home
> /dev/sda1 4.00 GB xfs 3.99 GB 3.86 GB
> part /boot
> --------------------------------------------------------------------------------------
> [/CODE]
>
> So far, so good. The new CentOS7 install can see the logical volume.
>
> Mounted the volume: ssm mount -t xfs /dev/lvm_pool/lvol001 /mnt/data
> Works.
> cd to /mnt/data and I can see the files left on the volume from the
> previous tests.
> Moving/copying/read/write -- works.
>
> ###################################################
>
> 3. Is it safe to assume when using RedHat System Storage Manager it's
> not necessary to use the lvm commands (vgexport and vgimport) to move
> two physical drives containing a logical volume in raid 1 from one
> computer to another?
>
> Thanks for your help and guidance.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
