Scott Silverman wrote:
> On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth@xxxxxxxxx> wrote:
>
>> I've got a box running C7, just updated (yesterday). It had an onboard
>> RAID controller, and an HBA. I just installed a new, additional RAID
>> card, all LSI.
>>
>> MegaCli64 only sees one controller. I can't seem to find the magic to
>> see the others. I *know* the new card is a MegaRAID - the box it came in
>> says so. The system sees it 1:00.0 RAID bus controller: LSI Logic /
>> Symbios Logic SAS1078 PCI-Express
>> Fusion-MPT SAS (rev 04)
>> 42:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3
>> 3108
>> [Invader] (rev 02)
>> 43:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic
>> SAS3008
>> PCI-Express Fusion-MPT SAS-3 (rev 02)
>>
>> I've connected a RAID box that we had to it. I'm trying to import the
>> foreign configuration and bring it online. I really can't reboot the
>> system for (literally) another month (the maintenance window); I saw
>> the firmware interface, but for Reasons, couldn't do it then, and
>> figured I'd be able to to it with MegaCli64, but so far, nope.
>> -AdpAllinfo gets only
>> one.
>>
>> Clues?
Please don't top post.
> I would try the newer storcli utility instead of megacli.
>
Is there a std. repo for it, or is it from that guy's website?
mark
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
