Possible to have EthX acting like the ipaddress of the attached device (aka bridge) having no ipaddress?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi

I have a Centos 6.X router/firewall/gateway for a /29 network all connected to one ETHX that has a switch behind it.

This setup works very well but does NOT allow me to QOS one of the devices (a VOIP phone, many lines) as for "tc" to work I need a device, not ipaddress.

I thought to connect the VOIP phone directly to the router, but in doing so I need that interface to ACT like the IPADDRESS of the VOIP box, meaning the ethernet interface has no ipaddress acting like a bridge:

     Internet
       |
  ---------------------------
  |   router ip
  |
  | BRIDGE        base of /29
  ---------------------------
    |             |
    |           -------------
    |           |            |
    |           _____________
    |             |  |  |  | 
    |
  ----------------
  | phone system |
  ----------------

That way I can use "tc" to prioritize the traffic for the phone system

If there are other ways to do this, please suggest.

thanks
Jobst




-- 
Sometimes, the sharpest sword is not enough, but usually...it is.

  | |0| |   Jobst Schmalenbach
  | | |0|   +61 3 9533 0000, POBox 277, Caulfield South, 3162, Australia
  |0|0|0|   
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux