Installation on Knights Landing (KNL) machines failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi all,

We have a customer, where we are trying to install CentOS 7.3 on the new Intel Knights Landing nodes, unfortunately, we are unable to install then using PXE boot.

Now, I have a lot of experience of installation of machines using PXE boot, so the setup of that is not the problem. Both myself and my colleagues have looked through the problem, and we are unable to get much diagnosis of the problem.

When booting the machine via the network, it loads the ramdisk, and then we get no output, and then the machine reboots. Unfortunately, we have unable to get anything else on the screen. The machines don't have VGA, and monitor capable ports, so we are stuck with Serial Over Lan over IPMI.

We have however, after some searching via search engines, we found some documentation suggesting that RHEL 7.2 and then with significant updates on 7.3 do work on these types of machines. We have then followed the same process to try installing the machines, and we have managed to get the machine up, and in a working order. However, we'd like to use CentOS 7.3, and would like to find the process of doing so, if it is any different

I was wondering to see if anyone else has seen any similar issues, and if there is a problem here, that we haven't tackled? Any further debugging we can do? Any assistance on this would be much appreciated

--
regards,

Arif Ali

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux