Re: Problem with softwareraid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 08/19/2017 12:06 PM, Mr Typo wrote:
sda                                          8:0    0   1.8T  0 disk
├─sda1                                       8:1    0   1.8T  0 part
└─WDC_WD20EFRX-68AX9N0_WD-WMC1T2547260     253:3    0   1.8T  0 mpath
   └─WDC_WD20EFRX-68AX9N0_WD-WMC1T2547260p1 253:8    0   1.8T  0 part


You haven't said anything about multipath hardware yet, and you've been referring to "sda1", etc, which makes me think that you probably don't have multipath hardware.

If that's true, then the problem is probably that someone installed the multipath software on this system after the last time it booted successfully. One fix could be to boot from install media and use rescue mode to get a shell. Inside the rescue environment, remove the multipath software.

If you did have multipath hardware, you'd be assembling the multipath targets, like WDC_WD20EFRX-68AX9N0_WD-WMC1T2547260p1, rather than sda1.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux