Tyan Thunder K8SE S2892 lm_sensors Config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at

	ftp://ftp.tyan.com/software/lms/lms_s2892.conf

However when I ran the sensors command on my S2892 I was getting a readout for an 
adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at 
Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the 
  adt7463 chip. His reply was:

> It's ok. You know, lm85 and adt7463 are pretty similar.
> Sometimes, hardware designer or manufactory guys will use them mixed.

So, in Raphael's sensors.conf replace the line 'chip "lm85-i2c-*-2e"' with 'chip 
"adt7463-i2c-*-2e"' and all will be well.

Kirk Bocek


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux