On 03/23/2017 10:20 PM, Digimer wrote:
Hi all, Not sure if this is on topic or not. I'm trying to query an SNMP value from centos 6 and I get a bad response if I don't specify the MIB to use: 0 digimer@pulsar:~/anvil/striker$ snmpget -v2c -c public -m /home/digimer/Downloads/APC/AP7900/MIB/powernet421.mib 10.255.2.1 .1.3.6.1.2.1.2.2.1.6.2 RFC1213-MIB::ifPhysAddress.2 = Hex-STRING: 00 C0 B7 5F 8A 85 0 digimer@pulsar:~/anvil/striker$ snmpget -v2c -c public 10.255.2.1 .1.3.6.1.2.1.2.2.1.6.2 IF-MIB::ifPhysAddress.2 = STRING: 0:c0:b7:5f:8a:85 Note the second reply is not returning the first character (should be '00:', returning '0:'. Trying to request Hex doesn't seem to help, either: 0 digimer@pulsar:~/anvil/striker$ snmpget -v2c -c public -Ox 10.255.2.1 .1.3.6.1.2.1.2.2.1.6.2 IF-MIB::ifPhysAddress.2 = STRING: 0:c0:b7:5f:8a:85 Any SNMP folks know what I might be doing wrong? Thanks!
use net-snmp-config --default-mibdirs to locate where the mib file can be dropped so that snmp can use them. copy the mib file to one of the paths returned. mine usually end up in: /usr/share/snmp/mibs net-snmp-config --snmpconfpath To find the snmp config files Add the mib to the snmp.conf file. Mine looks like this: mibs +ALL mibs +ASTERISK-MIB mibs /usr/share/snmp/mibs/powernet419.mib you can simplify the line by looking at the mib file for this: PowerNet-MIB DEFINITIONS ::= BEGIN and then the config file can be this: mibs +ALL mibs +ASTERISK-MIB mibs +PowerNet-MIB To use the form above, the file has to be like this /usr/share/snmp/mibs/powernet419-mib.txt You can also use the MIBS environment variable to specify things: MIBS=+CISCO-RHINO-MIB:SOME-OTHER-SPIFFY-MIB export MIBS _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx https://lists.centos.org/mailman/listinfo/centos
