On 03/02/17 20:24, Cameron Smith wrote:
Active Operations = Background Initialization (0%)
Once this completes you would be able to run a CC
well, I'm not so sure...
$ perccli /c0/v1 show init
Controller = 0
Status = Success
Description = None
VD Operation Status :
===================
-----------------------------------------------------------
VD Operation Progress% Status Estimated Time Left
-----------------------------------------------------------
1 INIT - Not in progress -
-----------------------------------------------------------
$ perccli /c0/v1 start init force
Controller = 0
Status = Failure
Description = None
Detailed Status :
===============
-------------------------------------------------
VD Operation Status ErrCd ErrMsg
-------------------------------------------------
1 INIT Failed 1001 Start FGI not possible
-------------------------------------------------
there are two more raid volumes in that chassis under a one
H800. The whole lot:
DG/VD TYPE State Access Consist Cache Cac sCC Size Name
---------------------------------------------------------------
0/0 Cac0 Optl RW Yes RWTD - OFF 512.0 GB
3/1 RAID10 Optl RW No RWBC R OFF 18.188 TB
1/2 RAID0 Optl RW Yes RWBC R OFF 38.195 TB
2/3 RAID0 Optl RW Yes RWBC R OFF 12.731 TB
---------------------------------------------------------------
All these disks currently in raid10, plus one more, were
before parts of a raid5 volume and all was a OK.
Although inconsistent the volume is in the OS and appears
normal.
it's quite a puzzle to me.
thanks
Cameron
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
