Maybe there is a better place to post this message but as my question
was still CentOS related thought I would start here. Please advise if
there is a better forum of which to ask this question.
I am playing around with making a "desktop" workstation out of a
Raspberry PI3. I have had no problems installing the OS and pretty much
have everything working except a Gnome desktop.
I did:
> yum groupinstall "GNOME Desktop"
and from what I can tell everything necessary is installed. However when
I try to start X up I see it try and start, the display blinks as if
everything is good and then drops back down to the console. The log file
shown below shows a single error ([ 2665.952] (EE) AIGLX: reverting to
software rendering).
[ 2665.710]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 2665.725] X Protocol Version 11, Revision 0
[ 2665.731] Build Operating System: 4.5.7-fedora-4
[ 2665.736] Current Operating System: Linux centos-rpi3 4.4.33-v7.1.el7
#1 SMP Mon Nov 21 18:48:06 UTC 2016 armv7l
[ 2665.736] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35
bcm2708_fb.fbwidth=1872 bcm2708_fb.fbheight=1168
bcm2709.boardrev=0xa22082 bcm2709.serial=0x54bd9ed0
smsc95xx.macaddr=B8:27:EB:BD:9E:D0 bcm2708_fb.fbswap=1
bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000
vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200
console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 elevator=deadline
rootwait selinux=1 security=selinux enforcing=0
[ 2665.756] Build Date: 09 November 2016 05:46:31PM
[ 2665.763] Build ID: xorg-x11-server 1.17.2-22.el7
[ 2665.769] Current version of pixman: 0.34.0
[ 2665.783] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2665.783] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2665.812] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Dec 31
20:08:58 2016
[ 2665.819] (==) Using config file: "/etc/X11/xorg.conf"
[ 2665.827] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2665.828] (==) ServerLayout "Default Layout"
[ 2665.828] (**) |-->Screen "Screen0" (0)
[ 2665.828] (**) | |-->Monitor "Monitor0"
[ 2665.829] (**) | |-->Device "VideocoreIV"
[ 2665.829] (**) |-->Input Device "Keyboard0"
[ 2665.829] (==) Automatically adding devices
[ 2665.829] (==) Automatically enabling devices
[ 2665.830] (==) Automatically adding GPU devices
[ 2665.830] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2665.830] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 2665.830] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2665.830] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 2665.830] (WW) Hotplugging is on, devices using drivers 'kbd',
'mouse' or 'vmmouse' will be disabled.
[ 2665.830] (WW) Disabling Keyboard0
[ 2665.830] (II) Loader magic: 0x54cf7004
[ 2665.830] (II) Module ABI versions:
[ 2665.830] X.Org ANSI C Emulation: 0.4
[ 2665.830] X.Org Video Driver: 19.0
[ 2665.830] X.Org XInput driver : 21.0
[ 2665.830] X.Org Server Extension : 9.0
[ 2665.831] (II) no primary bus or device found
[ 2665.831] (II) LoadModule: "glx"
[ 2665.832] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2665.855] (II) Module glx: vendor="X.Org Foundation"
[ 2665.855] compiled for 1.17.2, module version = 1.0.0
[ 2665.855] ABI class: X.Org Server Extension, version 9.0
[ 2665.855] (==) AIGLX enabled
[ 2665.855] (II) LoadModule: "fbdev"
[ 2665.856] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2665.857] (II) Module fbdev: vendor="X.Org Foundation"
[ 2665.857] compiled for 1.17.2, module version = 0.4.3
[ 2665.857] Module class: X.Org Video Driver
[ 2665.857] ABI class: X.Org Video Driver, version 19.0
[ 2665.857] (II) FBDEV: driver for framebuffer: fbdev
[ 2665.857] (++) using VT number 1
[ 2665.857] (WW) Falling back to old probe method for fbdev
[ 2665.857] (II) Loading sub module "fbdevhw"
[ 2665.857] (II) LoadModule: "fbdevhw"
[ 2665.858] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2665.859] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2665.859] compiled for 1.17.2, module version = 0.0.2
[ 2665.859] ABI class: X.Org Video Driver, version 19.0
[ 2665.859] (II) FBDEV(0): using default device
[ 2665.859] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 2665.860] (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32
[ 2665.860] (==) FBDEV(0): RGB weight 888
[ 2665.860] (==) FBDEV(0): Default visual is TrueColor
[ 2665.860] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2665.860] (II) FBDEV(0): hardware: BCM2708 FB (video memory: 8541kB)
[ 2665.860] (II) FBDEV(0): checking modes against framebuffer device...
[ 2665.860] (II) FBDEV(0): mode "1920x1200" not found
[ 2665.860] (II) FBDEV(0): mode "1600x1200" ok
[ 2665.860] (II) FBDEV(0): mode "1280x1024" ok
[ 2665.860] (II) FBDEV(0): mode "1152x864" ok
[ 2665.860] (II) FBDEV(0): mode "1024x768" ok
[ 2665.861] (II) FBDEV(0): mode "800x600" ok
[ 2665.861] (II) FBDEV(0): mode "720x400" ok
[ 2665.861] (II) FBDEV(0): mode "640x480" ok
[ 2665.861] (II) FBDEV(0): checking modes against monitor...
[ 2665.861] (--) FBDEV(0): Virtual size is 1600x1200 (pitch 1600)
[ 2665.861] (**) FBDEV(0): Default mode "1600x1200": 162.0 MHz (scaled
from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 2665.861] (II) FBDEV(0): Modeline "1600x1200"x0.0 162.00 1600 1664
1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 2665.861] (**) FBDEV(0): Default mode "1280x1024": 108.0 MHz (scaled
from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 2665.861] (II) FBDEV(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 2665.861] (**) FBDEV(0): Default mode "1152x864": 108.0 MHz (scaled
from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 2665.861] (II) FBDEV(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
[ 2665.861] (**) FBDEV(0): Default mode "1024x768": 65.0 MHz (scaled
from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 2665.861] (II) FBDEV(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2665.861] (**) FBDEV(0): Default mode "800x600": 36.0 MHz (scaled
from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 2665.861] (II) FBDEV(0): Modeline "800x600"x0.0 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2665.862] (**) FBDEV(0): Default mode "640x480": 25.2 MHz (scaled
from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 2665.862] (II) FBDEV(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2665.862] (**) FBDEV(0): Display dimensions: (518, 324) mm
[ 2665.862] (**) FBDEV(0): DPI set to (78, 94)
[ 2665.862] (II) Loading sub module "fb"
[ 2665.862] (II) LoadModule: "fb"
[ 2665.863] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2665.864] (II) Module fb: vendor="X.Org Foundation"
[ 2665.864] compiled for 1.17.2, module version = 1.0.0
[ 2665.865] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2665.865] (**) FBDEV(0): using shadow framebuffer
[ 2665.865] (II) Loading sub module "shadow"
[ 2665.865] (II) LoadModule: "shadow"
[ 2665.865] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2665.865] (II) Module shadow: vendor="X.Org Foundation"
[ 2665.865] compiled for 1.17.2, module version = 1.1.0
[ 2665.866] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2665.866] (==) Depth 24 pixmap format is 32 bpp
[ 2665.892] (==) FBDEV(0): Backing store enabled
[ 2665.894] (**) FBDEV(0): DPMS enabled
[ 2665.894] (==) RandR enabled
[ 2665.945] (II) SELinux: Disabled by boolean
[ 2665.952] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2665.952] (EE) AIGLX: reverting to software rendering
[ 2665.998] (II) AIGLX: Loaded and initialized swrast
[ 2665.998] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2666.260] (II) config/udev: Adding input device CM Storm QuickFire
Rapid keyboard (/dev/input/event0)
[ 2666.260] (**) CM Storm QuickFire Rapid keyboard: Applying InputClass
"evdev keyboard catchall"
[ 2666.260] (II) LoadModule: "evdev"
[ 2666.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2666.263] (II) Module evdev: vendor="X.Org Foundation"
[ 2666.263] compiled for 1.17.2, module version = 2.9.2
[ 2666.264] Module class: X.Org XInput Driver
[ 2666.264] ABI class: X.Org XInput driver, version 21.0
[ 2666.264] (II) Using input driver 'evdev' for 'CM Storm QuickFire
Rapid keyboard'
[ 2666.264] (**) CM Storm QuickFire Rapid keyboard: always reports core
events
[ 2666.264] (**) evdev: CM Storm QuickFire Rapid keyboard: Device:
"/dev/input/event0"
[ 2666.264] (--) evdev: CM Storm QuickFire Rapid keyboard: Vendor
0x2516 Product 0x4
[ 2666.265] (--) evdev: CM Storm QuickFire Rapid keyboard: Found keys
[ 2666.265] (II) evdev: CM Storm QuickFire Rapid keyboard: Configuring
as keyboard
[ 2666.265] (**) Option "config_info"
"udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/0003:2516:0004.000E/input/input13/event0"
[ 2666.265] (II) XINPUT: Adding extended input device "CM Storm
QuickFire Rapid keyboard" (type: KEYBOARD, id 6)
[ 2666.265] (**) Option "xkb_rules" "evdev"
[ 2666.270] (II) config/udev: Adding input device CM Storm QuickFire
Rapid keyboard (/dev/input/event1)
[ 2666.270] (**) CM Storm QuickFire Rapid keyboard: Applying InputClass
"evdev keyboard catchall"
[ 2666.270] (II) Using input driver 'evdev' for 'CM Storm QuickFire
Rapid keyboard'
[ 2666.270] (**) CM Storm QuickFire Rapid keyboard: always reports core
events
[ 2666.270] (**) evdev: CM Storm QuickFire Rapid keyboard: Device:
"/dev/input/event1"
[ 2666.271] (--) evdev: CM Storm QuickFire Rapid keyboard: Vendor
0x2516 Product 0x4
[ 2666.271] (--) evdev: CM Storm QuickFire Rapid keyboard: Found keys
[ 2666.271] (II) evdev: CM Storm QuickFire Rapid keyboard: Configuring
as keyboard
[ 2666.271] (**) Option "config_info"
"udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:2516:0004.000F/input/input14/event1"
[ 2666.271] (II) XINPUT: Adding extended input device "CM Storm
QuickFire Rapid keyboard" (type: KEYBOARD, id 7)
[ 2666.271] (**) Option "xkb_rules" "evdev"
[ 2666.623] (II) evdev: CM Storm QuickFire Rapid keyboard: Close
[ 2666.623] (II) UnloadModule: "evdev"
[ 2666.623] (II) evdev: CM Storm QuickFire Rapid keyboard: Close
[ 2666.623] (II) UnloadModule: "evdev"
[ 2666.703] (II) Server terminated successfully (0). Closing log file.
I used this /etc.X11/xorg.conf:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "VideocoreIV"
VendorName "Broadcom"
BoardName "RPI3Graphics"
Driver "fbdev"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Dell"
ModelName "Ultrasharp U2410"
DisplaySize 518 324
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "VideocoreIV"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1200" "1600x1200" "1280x1024"
"1152x864" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Does anybody see what I am doing wrong? Like I said it looks like the
desktop wants to startup but then just crshes.
Thanks for your help.
Paul (ganci@xxxxxxxxxx)
Cell: (303)257-5208
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
