Hello Alessandro,
On Fri, 2016-10-21 at 11:03 +0200, Alessandro Baggi wrote:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always
> - 0/4754882
smartctl -A only show a total error count for my disks, but I suppose
this means 0 errors on 4754882 reads...
Note that the "Pre-fail" does not indicate that your disk is about to
fail, it is an indication of the type of is issue that causes this
particular class of errors.
> 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always
> - 0
No retired blocks, that seems alright...
> My ssds are failing?
The easiest way to test for disk errors is by issuing
smartctl -l xerror /dev/sda
If the output contains "No Errors Logged" your disks are fine.
Quite easy to put this in a (daily) cron job that greps the output of
smartctl for that string and if it does not find a match sends a mail
warning you about those disk errors.
#!/bin/bash
SMARTCTL=/usr/sbin/smartctl
GREP=/bin/grep
DEVICES='sda sdb'
HOST='hostname'
TO='a@xxxxxxxxxxx'
CC='b@xxxxxxxxxxx'
for d in $DEVICES ; do
if [ "$($SMARTCTL -l xerror /dev/$d | $GREP No\ Errors\ Logged)" == '' ]; then
# ERRORS FOUND
$SMARTCTL -x /dev/$d | mail -c $CC -s "$HOST /dev/$d SMART errors" $TO
fi
done
Regards,
Leonard.
--
mount -t life -o ro /dev/dna /genetic/research
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
