Re: gigE -> 100Mb problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 10/11/2016 9:03 PM, Ashish Yadav wrote:
Please test that if both the server are communicating with each other at
1Gbps or not via "iperf" tool.

If above gives result of 1Gbps then it will eliminate the NICs problem then
you know that it is a problem with cisco switch only.

after they forced the cisco ports to gigE, I was seeing 200-400Mbps in iPerf, which was odd. servers were both very lightly loaded.

BUT... the switch ports kept going offline on us. Note I have no admin access to the switch, its managed by IT so I have to go through channels to get anything. I asked what error codes were causing the ports to go offline but haven't heard back. as of right now, both servers are offline, (I can reach their IPMI management controller, and remotely log onto the console just fine, but the ports show no link). When I was in the DC yesterday, I switched ports, same problem, I also switched the network cable with a different (HP) server, it had no problems on the same cable+port thats giving these supermicro servers problems.

I'd chalk it up to a bad NIC, but two identical servers with two nic's each all have this problem, so its got to be something else, some weirdness with the 82574L as implemented on these SuperMicro X8DTE-F servers running CentOS 6.7 ?!? In our old DC, these servers ran rock solid for several years without any network issues at all, in that rack I had a Netgear JGS524




--
john r pierce, recycling bits in santa cruz

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux