Craig White <craigwhite@xxxxxxxxxxx> wrote:
> of course you are assuming facts not in evidence.
> If for example, he was trying to dual-boot with Windows and
> Windows had already set the drives up as fake raid...
> then he would probably have to work it through in this way
> to use a partition on the existing raid setup in some
manner
> - and then my links may have been helpful.
Incorrect.
What I'm saying is that FRAID does _not_ have drivers like
intelligent hardware RAID cards. They are typically embedded
in the ATA subsystem (requiring a full kernel rebuild), or
have other requirements other than just "building a SCSI
module."
> I of course wouldn't know this - I only have one system as
> dual-boot - my ancient Sony PictureBook laptop and am
> generally not a fan of dual-boot systems.
I've installed over 1,000 dual-boot systems in my time.
I have _never_ gotten FRAID to work at all on them.
Now using MD and NT4-volumes (and, to a lesser extent,
NT5-LDM) simultaneously, that's a different story. A
crapload more manageable.
But I agree with you, dual-booting is a nightmare.
Especially since Microsoft is currently "dorking around" with
disk geometry in NT5.1SP2+ (XP SP2) and is breaking all sorts
of things. They are using areas of Cylinder 0 (MBR
cylinder)to store information on non-LDM disks.
--
Bryan J. Smith | Sent from Yahoo Mail
mailto:b.j.smith@xxxxxxxx | (please excuse any
http://thebs413.blogspot.com/ | missing headers)
