Re: KVM Virtualization Network VLAN CentOS7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 6 April 2016 at 19:21, Subscriber <ml-lists@xxxxxxxxxxxxx> wrote:

> Hello James,
>
> Wednesday, April 6, 2016, 5:34:26 PM, you wrote:
>
> > Note that this is pretty much the last use case you cannot use
> > NetworkManager for but need the legacy network service ... to save you
> some
> > pain in trying to configure it ;)
> I disagree... NetworkManager works perfectly.
>
>
>
Ah I recall slightly incorrectly form my testing last May ... to be fair
it's been nearly a year since I last looked at this ;)

https://www.hogarthuk.com/?q=node/8

it's nmcli specifically that wouldn't work as the bridge slave had an
ethernet type requirement so wouldn't work if the type was bond or vlan

NM was able to create the connection from the file configuration however
.... my apologies

Here's the bug with the limitation due to be fixed in the upcoming 7.3

https://bugzilla.redhat.com/show_bug.cgi?id=1183420

That's one less reason to use the legacy network service then!
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux