On 3/28/2016 11:44 PM, Götz Reinicke - IT Koordinator wrote:
How is your interface exactly configured ?
TYPE=Bond #Interface type set to bond
BOOTPROTO=static
BONDING_MASTER=yes
BONDING_OPTS="mode=4" #i set mode to active-backup
DEFROUTE=yes
IPADDR="192.168.xxx.xxx"
NETMASK=255.255.255.0
GATEWAY="192.168.xxx.xxx"
IPV4_FAILURE_FATAL=no
IPV6INIT=no
NAME=bond0
DEVICE=bond0
ONBOOT=yes
TYPE="Ethernet"
MASTER=bond0
SLAVE=yes
NAME="enp4s0f0"
UUID="xxx"
DEVICE="enp4s0f0"
ONBOOT="yes"
TYPE="Ethernet"
MASTER=bond0
SLAVE=yes
NAME="enp4s0f0"
UUID="xxx"
DEVICE="enp4s0f1"
ONBOOT="yes"
should both those 'ethernet' devices have the same NAME ?
--
john r pierce, recycling bits in santa cruz
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
