Re: Very odd issue w/ a CentOS 6 system

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Phil Wyett wrote:
> On Wed, 2016-03-23 at 09:20 -0400, m.roth@xxxxxxxxx wrote:
>> Now, this is one we have an issue with: it's got a bttv card, and motion
>> running on it. It's a Dell PE R720. For some reason, it has never liked
>> the card: 20 min after reboot, it says fatal bus error... but nothing's
>> wrong, and it runs just fine. Well, expect that we need to keep it on
>> the 2.6.32-431.20.3 kernel, because *everything* later, it randomly starts
>> rebooting, several times a day.
<snip>
>
> What is the make/model of the card?
lspci says:
Brooktree Corporation Bt878 Audio Capture (rev 11)
>
> Are you supplying options when loading the bttv module?

On and off, I've been googling to find if there's something I can tell it,
or the kernel on boot. Currently, I have, in /etc/modprobe.d/bttv:
options i2c-algo-bit bit_test=1
options bttv gbuffers=16 card=98,98,98,98,98,98,98,98
radio=0,0,0,0,0,0,0,0 tuner=4,4,4,4,4,4,4,4 chroma_agc=1 combfilter=2
full_luma_range=1 coring=1

which is something I got from googling as to how to get it working. Think
there's something in that - the first line? that is not a good thing?

      mark

        mark

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux