Re: USB Serial ports (ttyACMn) CentOS 6.7 (64-bit) vs. CentOS 6.7 (64-bit)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I have not yet found a USB-to-serial adapter detected as /dev/ttyACM1.
Try /dev/ttyUSB0 ?

- Mike

On Sat, Feb 13, 2016 at 10:14 AM, Robert Heller <heller@xxxxxxxxxxxx> wrote:

> I sent this out about a week or so ago, but I have heard nothing. I am
> *thinking* it is a SELINUX problem, but I cannot figure out what. The
> SELINUX
> settings for both machines are *exactly* the same (the stock defaults for a
> standard CentOS 6 install).  The *only* difference is that the desktop
> (sauron) has a few VMs setup (under KVM) and the laptop (gollum) does not.
> The
> desktop has an AMD processor and a nVidia video chipset and the laptop has
> an
> Intel processor and an Intel graphic controller.  Although I can't see how
> either the processor or video chipset would have anything to to with the
> USB
> or USB serial port-type devices.  The desktop also has a PCI quad serial
> port
> card and includes the 8250.nr_uarts=8 kernel option and is set up to use an
> analog dialup modem to make PPP connections (again, I don't see that as
> having
> anything to do with anything).
>
> Both machines are running the same kernel: 2.6.32-573.12.1.el6.x86_64
>
>
>
>
> At Thu, 4 Feb 2016 16:13:33 -0500 Robert Heller <heller@xxxxxxxxxxxx>
> wrote:
>
> >
> > I have two computers: both running CentOS 6.7, 64-bit, with
> > kernel 2.6.32-573.12.1.el6.x86_64.  One is a laptop with an 2 core Intel
> > processor and the other is a desktop machine with a 4 core AMD
> processor. Both
> > with selinux enabled.
> >
> > I have a USB serial port device (a RR-CirKits LCC-Buffer USB).  On the
> desktop
> > I am getting this error:
> >
> > sauron.deepsoft.com% sudo minicom
> > Device /dev/ttyACM0 access failed: No such file or directory.
> > sauron.deepsoft.com% dir -lZ /dev/ttyACM0
> > crw-rw----. root dialout system_u:object_r:tty_device_t:s0 /dev/ttyACM0
> >
> > But it is working on the laptop!
> >
> > gollum.deepsoft.com% dir -lZ /dev/ttyACM1
> > crw-rw----. root dialout system_u:object_r:tty_device_t:s0 /dev/ttyACM1
> >
> > Same kernel, same device (except it is showing up as ttyACM1 on the
> laptop).
> >
> > What is going on here?
> >
> >
> >
>
> --
> Robert Heller             -- 978-544-6933
> Deepwoods Software        -- Custom Software Services
> http://www.deepsoft.com/  -- Linux Administration Services
> heller@xxxxxxxxxxxx       -- Webhosting Services
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> https://lists.centos.org/mailman/listinfo/centos
>



-- 
---~~.~~---
Mike
//  SilverTip257  //
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux