On 20/12/15 11:13 PM, dsavage@xxxxxxxxxxx wrote:
> My workhorse server is a SuperMicro with their H8DM8-2 motherboard. For
> many years it ran CentOS 5.x and 6.x until the boot drive failed last
> year. I installed a 1TB SSD as /dev/sda and planned to install CentOS 7 on
> it, replacing CentOS 6.5 on the failed drive. Unfortunately every CentOS 7
> media I tried, either optical disk or USB thumb drive, breaks down just a
> few seconds after selecting "Install..."
>
> The H8DM8-2 motherboard is based on the nVidia MPC55 Pro and NEC uPD720400
> chipsets. It has an on-board Adaptec AIC-7902W dual-channel SCSI
> controller and companion Zero-Channel RAID card. It has twin AMD Opteron
> HE processors and 32GB of registered ECC DDR2 memory. The RAID array is
> populated with ten Fujitsu 300GB 15K SCSI3 drives.
>
> I took it into a friendly Linux shop where they reviewed / verified all of
> my work and confirmed the boot-time problem. Two hours into the effort, my
> friend plugged in a bootable Windows 10 thumb drive and to our amazement,
> it came up very normally. So did another thumb drive with a Fedora 23
> installation image. So there's nothing wrong with my hardware.
>
> We believe the problem is due to Red Hat compiling RHEL7 without at least
> one old device driver that I still need. My friend thinks we should build
> an installation disk from a modified CentOS 7 live CD kickstart file and a
> CentOS-Plus kernel. While that may work, I think there may be a simpler
> boot-time kernel option I could use to successfully install from a stock
> ISO.
>
> Does anyone have any suggestions for boot-time options I could try?
Try 'nomodeset'. It might not be detecting the video card properly.
--
Digimer
Papers and Projects: https://alteeve.ca/w/
What if the cure for cancer is trapped in the mind of a person without
access to education?
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
