Am Saturday 12 December 2015, 21:12:08 schrieb Gordon Messmer:
> On 12/12/2015 05:41 AM, Günther J. Niederwimmer wrote:
> > The problem I found now, is I have only a eth0, eth1 configured but I
> > found now a eth2 (??????) and the eth1 is not working next boot I have a
> > eth3 .......
> It wasn't clear that you were talking about KVM *guests* before.
>
> Are the ethernet addresses changing between boots? If you run "ifconfig
> -a | grep ether" does the output change from one boot to another?
When the network is not working the virtio NICs are not working?
When I boot / reboot I have only one from the configured NICs eth0 or eth1 and
a not configured NIC eth2 after a broken reboot I have eth1 and eth3 and so on.
But sometimes after more reboots the network is working again?
The 2 "hostdev" configured NICs are working always (external)
> What do you get from "virsh dumpxml <guest>" in the KVM host?
OK, I test it.
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> https://lists.centos.org/mailman/listinfo/centos
--
mit freundlichen Grüßen / best regards,
Günther J. Niederwimmer
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
