Re: Two WiFi routers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 11/4/2015 6:07 AM, Timothy Murphy wrote:
Thanks for your response.
Do you have them on different channels?

If you have an android device with wifi (tablet, phone), install the freeware app "WiFi Analyzer", and put it in the display mode where it shows channels across the bottom and signal strength up the side, each channel in use shows up like a parabola as they overlap by 2 channels. find two clear channels for your two wifi access points.

now, you said two ROUTERS... a wifi router is really a internet gateway/firewall/sharing appliance, and implements 'NAT' (Network Address Translation) such that the clients behind the router are on their own private network. Normally, you want two wireless access points or WAP's, without any routing. many consumer routers /can/ be configured to implement this, you don't use the WAN port at all, you disable the DHCP service on the LAN side, and you set the LAN IP to a unique IP on your LAN subnet for management, then the 'router' will bridge the wireless users onto your existing LAN.


On 11/4/2015 9:10 AM, Bowie Bailey wrote:

If all of the routers are providing access to the same network, you can set up the same SSID, wifi password, and security type for all the routers and the clients should seamlessly switch between them as they move around. Adjust the channels so that they aren't interfering with each other. If you have an android device, there is an app called Wifi Analyzer that can show you a graph of all of the available wifi signals, their signal strength, and what channel they are on.

they won't seamlessly roam between access points unless those are centrally managed access points. Ideally, for a multi-access point integrated wireless network, you want a system like the Ubquiti UniFi AP's, where the access points are all centrally controlled (UniFi uses a software based controller. most other similar systems like Cisco AiroLAN use a hardware controller) and act as a single network, this WILL do roaming.

--
john r pierce, recycling bits in santa cruz

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux