On 10/7/2015 11:47 AM, Jack Bailey wrote:
On 10/07/15 11:13, m.roth@xxxxxxxxx wrote:
Jack Bailey wrote:
controller that expects to talk to individual SAS or SATA drives. you
can manage it with hpssacli from centos.
I have the P822. It has no JBOD or RAID 0. hpacucli works with CentOS
7.0, but is broken on 7.1 -- it cannot find the controller.
Can it do RAID 6?
This page says it does.
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111199
The page also says it does RAID 0, but I did not see that in the 5.42
BIOS.
on many of those P4/P8 series raid cards, raid6 support is an extra cost
option, but once its enabled for a given card, it continues to work on
that card even if its moved. The P420's I have support raid0 (stripe)...
I googled JetStor, and saw a whole lineup of NAS/SAN boxes that support
NFS, ISCSI, etc. these wouldn't work with a raid card like a P800,
but a SAS expansion tray from a JetStor should work if direct connected
to the SmartArray card... a JetStor that has its own embedded raid
controller with SAS host connectivity won't work with a hardware raid
card like a P800, you would instead want a simple HBA card, such as a HP
H221 Host Bus Adapter
--
john r pierce, recycling bits in santa cruz
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
