On 06/26/2015 07:58 AM, Mark Milhollan wrote:
On Wed, 24 Jun 2015, Gordon Messmer wrote:
1) If you have a system with a single disk, you have to reboot to add
partitions for new guests. Linux won't refresh the partition table on the disk
it boots from.
I'm not sure this is still true, but I use LVM almost everywhere so I
seldom need to try.
It's definitely still true on CentOS 7.
3) If you want redundancy, partitions on top of RAID is more complex than LVM
on top of RAID. As far as I know, partitions on top of RAID are subject to the
same limitation as in #1.
They look the same to me, and share the same limitations (WRT the PV).
Create a RAID1 volume on two drives. Partition that volume.
Where is your partition table? Is it in a spot where your BIOS/UEFI or
another OS will see it? Will that non-Linux system try to open or
modify the partitions inside your RAID? It depends on what metadata
version you use. If you set this up in Anaconda, it's going to be
version 0.90, and your partition table will be in a spot where a
non-Linux system will read it.
There's no ambiguity with LVM. That's what I mean when I say that it's
less complicated.
The format of MBR and GPT partition tables are imposed by the design of
BIOS and UEFI. There is no good reason to use them for any purpose
other than identifying the location of a filesytem that BIOS or UEFI
must be able to read.
The limitation I was referring to was that as far as I know, if Linux
has mounted filesystems from a partitioned RAID set, you can't modify
partitions without rebooting. That limitation doesn't affect LVM.
Either can be partitioned but making more LVs is indeed simpler than
using DM to partition a partition or MD. I'd like to use LVM RAID and
never again have RAIDed partitions, so that I can choose the RAID level
per LV, alas LVM RAID MDs don't appear in /proc/mdstat so monitoring
them is somewhat more annoying.
4) As far as I know, Anaconda can't set up a logical volume that's a redundant
type, so LVM on top of RAID is the only practical way to support redundant
storage of your host filesystems.
Anaconda has many deficiencies and indeed I am annoyed enough with it
that I often skip trying to use its new disk manager, but making the PV
on an MD RAID isn't impossible
I know, that's what I said was the only practical way to support
redundant storage (when using LVM).
, or alternatively making the LVs
redundant after install is a single command (each) and you can choose
whether it should be mere mirroring or some MD manged RAID level (modulo
the LVM RAID MD monitoring issue).
I hadn't realized that. That's an interesting alternative to MD RAID,
particularly for users who want LVs with different RAID levels.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
