Re: how do I make my headset work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri, 5 Jun 2015, Fred Smith wrote:

if it's a desktop, I'll assume it's already a 3-prong polarized plug
(unless someone has used a 2-3 prong adaptor, or the building is
mis-wired.

All the above kind of assumes a US-like outlet. I don't recall where
the OP resides/works, so that may be all wrong.

Correct.
North Dakota.

It's a desktop in an old house.
The outlets have ground-fault protection,
but the third prong is ungrounded.

You can get cheap devices that plug into a 3-prong outlet and have little
LED lights that indicate whether the wiring is correct, as regards ground
and neutral, or not.

Also, it's possible that you've got a cheap headset/mic combo that does
not have the shielded audio cable wired correctly. It's also possible
that it's a cheap-a** rig that doesn't even use shielded cable from the
plug to the mic/phones.

It's an Insignia NS-PAH5101
It does not have a separate power source,
just plugs for the pink and green sockets.
The cables are pretty thin.
If the problem is shielding,
is there something I could do to shield the cables?

--
Michael   hennebry@xxxxxxxxxxxxxxxxxxxxx
"SCSI is NOT magic. There are *fundamental technical
reasons* why it is necessary to sacrifice a young
goat to your SCSI chain now and then."   --   John Woods
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux