On Thu, 12 Mar 2015 12:43:27 -0500, Robert Moskowitz <rgm@xxxxxxxxxxxxxxx>
wrote:
I know how to use 'ip' to set up a static route, e.g.:
ip route add 192.168.128.0/17 via 40.53.24.3 dev eth0
But if you reboot or restart network, you loose this. Thus you have to
make it persistant. I found:
http://www.cyberciti.biz/tips/configuring-static-routes-in-debian-or-red-hat-linux-systems.html
where it says to add to ifcfg-eth0:
192.168.128.0/17 via 40.53.24.3
Create the file /etc/sysconfig/network-scripts/route-eth0
Add the following for each static route, incrementing the numeric for each:
ADDRESS0=192.168.128.0
NETMASK0=255.255.128.0
GATEWAY0=40.53.24.3
But this did not work after the interface was restarted. So what is the
proper to set up persistant static routes?
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
