On Thu, 2005-10-20 at 12:52 +0200, Jujo wrote:
> Mensaje citado por rado <rado@xxxxxxxxxxxxxxx>:
>
> Hello I think it may be a bug; take a look to bug 1050; it seems as the dmraid
> package is buggy
>
> Regards
>
> > Hi!
> > A few days back ...I upgraded using yum update. I did this on 3
> > machines of which 2 of the machines are mirrors. I have no problems
> > w/the other 2 machines which leads me to believe that the fault lies in
> > 2.6 but rather I think I have a hard drive failure.
> > while the system is trying to boot up.
> >
> > it goes to: grub stage 2....that's the first thing I seem to find
> > outside of taking forever to find the drives.
> >
> > then when it is booting....lots of hdc errors
> >
> > here's an excerpt from /var/log/messages:
> >
> > ide: failed opcode was: unknown
> > Oct 19 20:34:46 rbmain1 kernel: end_request: I/O error, dev hdc, sector
> > 552
> > Oct 19 20:34:46 rbmain1 kernel: Buffer I/O error on device hdc, logical
> > block 69
> > Oct 19 20:34:46 rbmain1 kernel: hdc: drive not ready for command
> > Oct 19 20:34:46 rbmain1 kernel: hdc: status error: status=0x10
> > { SeekComplete }
> >
thx for your reply!
Oh boy!, now what to do! I have no clue what dmraid is! I guess I will
google up on this!
My other raided system works just find thru the upgrade.
If I get rid of dmraid...hummmm...what happens to md0 & md1? as the
raid1 arrays???
thx
john rose
>
>
