As long as you have the DisplayPort connection on your computer and you
have the proper cable to connect it to the monitor then it's no trouble. I
had been using dual DP monitors on my last work machine. Also, note that
sometimes the PC end is normal DisplayPort but sometimes it has a mini
DisplayPort connection. Just get the right cable and it should be as
simple as HDMI.
On Jan 28, 2015 3:31 PM, "Frank Cox" <theatre@xxxxxxxxxxxxxxxxxxx> wrote:
> Since my current monitor appears to be slowly dying, I'm looking for a
> replacement. I generally use hardware replacement as an excuse to get
> something bigger/better/faster than what I had before, so I'm currently
> considering something like a BenQ GW2765HT.
>
> The manual for my Intel motherboard has this to say about DisplayPort on
> the built-in graphics controller:
>
> QUOTE:
> DisplayPort’s maximum supported display resolution is 2560 x 1600 at a
> 60 Hz refresh rate with a 16:10 aspect ratio (WQXGA).
> END OF QUOTE
>
> It also states that the maximum supported resolution on the built-in
> DVI-I port is 1920x1200, which is the resolution of the monitor that I
> have right now; the one that appears to be dying. Therefore, this new
> monitor wouldn't work at full resolution with that output.
>
> Having never used DisplayPort before, I'm wondering if this means that
> if I purchase the BenQ monitor above, or something similar, I can then
> reasonably expect to plug it in and have it just-work with my Centos 7
> setup.
>
> --
> MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
