So,
1. I installed a minimal CentOS-7.
2. I then installed epel-release.
3. I then installed etckeeper from epel.
4. I then ran yum update -y.
5. I then rebooted (kernel update).
6. I then ran "yum groups install "X Window System"
7. I then ran "yum groups "MATE Desktop"
8. I then ran startx.
Result: Graphical destop wallpaper appears, spinning disc in center for 2-3
seconds then this:
X.Org X Server 1.15.0
Release Date: 2013-12-27
. . .
(==) Using config directory "etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension . . .
Initializing built-in extension DR12
Loading extension GLX
waiting for X server to shut down (EE) Server terminated successfully (0).
Closing log file.
Said log file (/var/log/Xorg.0.log) contains:
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 76.833] X Protocol Version 11, Revision 0
[ 76.833] Build Operating System: 2.6.32-220.17.1.el6.x86_64
[ 76.833] Current Operating System: Linux lanet126.hamilton.harte-lyne.ca
3.10.0-123.9.3.el7.x86_64 #1 SMP Thu Nov 6 15:06:03 UTC 2014 x86_64 [
76.833] Kernel command line:
BOOT_IMAGE=/vmlinuz-3.10.0-123.9.3.el7.x86_64
root=/dev/mapper/centos_lanet126-root ro crashkernel=auto
rd.lvm.lv=centos_lanet126/root vconsole.font=latarcyrheb-sun16
vconsole.keymap=us rd.lvm.lv=centos_lanet126/swap rhgb quiet LANG=en_GB.UTF-8
[ 76.833] Build Date: 10 June 2014 01:29:18AM
[ 76.833] Build ID: xorg-x11-server 1.15.0-7.el7
[ 76.833] Current version of pixman: 0.32.4
[ 76.833] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 76.833] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 76.834] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 10 12:05:30 2014
[ 76.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 76.844] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [
76.858] (==) No Layout section. Using the first Screen section. [
76.858] (==) No screen section available. Using defaults.
[ 76.858] (**) |-->Screen "Default Screen Section" (0)
[ 76.858] (**) | |-->Monitor "<default monitor>"
[ 76.859] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 76.859] (==) Automatically adding devices
[ 76.859] (==) Automatically enabling devices
[ 76.859] (==) Automatically adding GPU devices
[ 76.862] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 76.862] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 76.862] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 76.862] (II) Loader magic: 0x812020
[ 76.862] (II) Module ABI versions:
[ 76.862] X.Org ANSI C Emulation: 0.4
[ 76.862] X.Org Video Driver: 15.0
[ 76.862] X.Org XInput driver : 20.0
[ 76.862] X.Org Server Extension : 8.0
[ 76.862] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 76.864] (--) PCI:*(0:0:2:0) 8086:2e12:17aa:3048 rev 3, Mem @
0xfc000000/4194304, 0xe0000000/268435456, I/O @ 0x00001c70/8, BIOS @
0x????????/131072
[ 76.864] (--) PCI: (0:0:2:1) 8086:2e13:17aa:3048 rev 3, Mem @
0xfc400000/1048576, BIOS @ 0x????????/65536
[ 76.864] Initializing built-in extension Generic Event Extension [
76.864] Initializing built-in extension SHAPE
[ 76.864] Initializing built-in extension MIT-SHM
[ 76.864] Initializing built-in extension XInputExtension
[ 76.864] Initializing built-in extension XTEST
[ 76.864] Initializing built-in extension BIG-REQUESTS
[ 76.864] Initializing built-in extension SYNC
[ 76.864] Initializing built-in extension XKEYBOARD
[ 76.864] Initializing built-in extension XC-MISC
[ 76.864] Initializing built-in extension XINERAMA
[ 76.864] Initializing built-in extension XFIXES
[ 76.864] Initializing built-in extension RENDER
[ 76.865] Initializing built-in extension RANDR
[ 76.865] Initializing built-in extension COMPOSITE
[ 76.865] Initializing built-in extension DAMAGE
[ 76.865] Initializing built-in extension MIT-SCREEN-SAVER
[ 76.865] Initializing built-in extension DOUBLE-BUFFER
[ 76.865] Initializing built-in extension RECORD
[ 76.865] Initializing built-in extension DPMS
[ 76.865] Initializing built-in extension Present
[ 76.865] Initializing built-in extension X-Resource
[ 76.865] Initializing built-in extension XVideo
[ 76.865] Initializing built-in extension XVideo-MotionCompensation [
76.865] Initializing built-in extension SELinux
[ 76.866] Initializing built-in extension XFree86-VidModeExtension [
76.866] Initializing built-in extension XFree86-DGA
[ 76.867] Initializing built-in extension XFree86-DRI
[ 76.868] Initializing built-in extension DRI2
[ 76.868] (II) "glx" will be loaded by default.
[ 76.868] (WW) "xwayland" is not to be loaded by default. Skipping. [
76.868] (II) LoadModule: "dri2"
[ 76.868] (II) Module "dri2" already built-in
[ 76.868] (II) LoadModule: "glamoregl"
[ 76.897] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 76.975] (II) Module glamoregl: vendor="X.Org Foundation"
[ 76.975] compiled for 1.15.0, module version = 0.5.1
[ 76.975] ABI class: X.Org ANSI C Emulation, version 0.4
[ 76.975] (II) LoadModule: "glx"
[ 76.975] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [
76.977] (II) Module glx: vendor="X.Org Foundation"
[ 76.977] compiled for 1.15.0, module version = 1.0.0
[ 76.977] ABI class: X.Org Server Extension, version 8.0
[ 76.977] (==) AIGLX enabled
[ 76.977] Loading extension GLX
[ 76.977] (==) Matched intel as autoconfigured driver 0
[ 76.977] (==) Matched intel as autoconfigured driver 1
[ 76.977] (==) Matched modesetting as autoconfigured driver 2
[ 76.977] (==) Matched fbdev as autoconfigured driver 3
[ 76.977] (==) Matched vesa as autoconfigured driver 4
[ 76.977] (==) Assigned the driver to the xf86ConfigLayout
[ 76.977] (II) LoadModule: "intel"
[ 76.977] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [
77.023] (II) Module intel: vendor="X.Org Foundation"
[ 77.023] compiled for 1.15.0, module version = 2.21.15
[ 77.023] Module class: X.Org Video Driver
[ 77.023] ABI class: X.Org Video Driver, version 15.0
[ 77.023] (II) LoadModule: "modesetting"
[ 77.023] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [
77.025] (II) Module modesetting: vendor="X.Org Foundation"
[ 77.025] compiled for 1.15.0, module version = 0.8.0
[ 77.025] Module class: X.Org Video Driver
[ 77.025] ABI class: X.Org Video Driver, version 15.0
[ 77.025] (II) LoadModule: "fbdev"
[ 77.025] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [
77.031] (II) Module fbdev: vendor="X.Org Foundation"
[ 77.031] compiled for 1.15.0, module version = 0.4.3
[ 77.031] Module class: X.Org Video Driver
[ 77.031] ABI class: X.Org Video Driver, version 15.0
[ 77.031] (II) LoadModule: "vesa"
[ 77.031] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [
77.035] (II) Module vesa: vendor="X.Org Foundation"
[ 77.035] compiled for 1.15.0, module version = 2.3.2
[ 77.035] Module class: X.Org Video Driver
[ 77.035] ABI class: X.Org Video Driver, version 15.0
[ 77.035] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4
Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD
Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 77.035] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [
77.035] (II) FBDEV: driver for framebuffer: fbdev
[ 77.035] (II) VESA: driver for VESA chipsets: vesa
[ 77.035] (++) using VT number 1
[ 77.047] (WW) Falling back to old probe method for modesetting [
77.047] (WW) Falling back to old probe method for fbdev
[ 77.047] (II) Loading sub module "fbdevhw"
[ 77.047] (II) LoadModule: "fbdevhw"
[ 77.047] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 77.054] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 77.054] compiled for 1.15.0, module version = 0.0.2
[ 77.054] ABI class: X.Org Video Driver, version 15.0
[ 77.054] (WW) Falling back to old probe method for vesa
[ 77.054] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 77.054] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 77.054] (==) intel(0): RGB weight 888
[ 77.054] (==) intel(0): Default visual is TrueColor
[ 77.054] (--) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43 [
77.054] (**) intel(0): Relaxed fencing enabled
[ 77.054] (**) intel(0): Wait on SwapBuffers? enabled
[ 77.054] (**) intel(0): Triple buffering? enabled
[ 77.054] (**) intel(0): Framebuffer tiled
[ 77.054] (**) intel(0): Pixmaps tiled
[ 77.054] (**) intel(0): 3D buffers tiled
[ 77.054] (**) intel(0): SwapBuffers wait enabled
[ 77.054] (==) intel(0): video overlay key set to 0x101fe
[ 77.098] (II) intel(0): Output VGA1 has no monitor section
[ 77.100] (II) intel(0): Output HDMI1 has no monitor section
[ 77.100] (II) intel(0): Output DP1 has no monitor section
[ 77.148] (II) intel(0): EDID for output VGA1
[ 77.148] (II) intel(0): Manufacturer: BNQ Model: 7659 Serial#: 745 [
77.148] (II) intel(0): Year: 2004 Week: 15
[ 77.148] (II) intel(0): EDID Version: 1.3
[ 77.148] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 77.148] (II) intel(0): Sync: Separate Composite
[ 77.148] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [
77.148] (II) intel(0): Gamma: 2.20
[ 77.148] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 77.148] (II) intel(0): First detailed timing is preferred mode [
77.148] (II) intel(0): redX: 0.637 redY: 0.344 greenX: 0.309 greenY: 0.582
[ 77.148] (II) intel(0): blueX: 0.143 blueY: 0.100 whiteX: 0.313 whiteY:
0.329
[ 77.148] (II) intel(0): Supported established timings:
[ 77.148] (II) intel(0): 720x400@70Hz
[ 77.148] (II) intel(0): 640x480@60Hz
[ 77.148] (II) intel(0): 640x480@67Hz
[ 77.148] (II) intel(0): 640x480@72Hz
[ 77.148] (II) intel(0): 640x480@75Hz
[ 77.148] (II) intel(0): 800x600@56Hz
[ 77.148] (II) intel(0): 800x600@60Hz
[ 77.148] (II) intel(0): 800x600@72Hz
[ 77.148] (II) intel(0): 800x600@75Hz
[ 77.148] (II) intel(0): 832x624@75Hz
[ 77.148] (II) intel(0): 1024x768@60Hz
[ 77.148] (II) intel(0): 1024x768@70Hz
[ 77.148] (II) intel(0): 1024x768@75Hz
[ 77.148] (II) intel(0): 1280x1024@75Hz
[ 77.148] (II) intel(0): 1152x864@75Hz
[ 77.148] (II) intel(0): Manufacturer's mask: 0
[ 77.148] (II) intel(0): Supported standard timings:
[ 77.148] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 77.148] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
[ 77.148] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 77.148] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
[ 77.148] (II) intel(0): Supported detailed timing:
[ 77.148] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm [
77.148] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440
h_blank_end 1688 h_border: 0
[ 77.148] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028
v_blanking: 1066 v_border: 0
[ 77.148] (II) intel(0): Supported detailed timing:
[ 77.148] (II) intel(0): clock: 25.2 MHz Image Size: 304 x 228 mm [
77.148] (II) intel(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end
800 h_border: 0
[ 77.148] (II) intel(0): v_active: 350 v_sync: 387 v_sync_end 389
v_blanking: 449 v_border: 0
[ 77.148] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max:
81 kHz, PixClock max 145 MHz
[ 77.148] (II) intel(0): Monitor name: BenQ FP731�
[ 77.148] (II) intel(0): EDID (in hex):
[ 77.148] (II) intel(0): 00ffffffffffff0009d15976e9020000
[ 77.148] (II) intel(0): 0f0e01036c221b78ea00a5a3584f9524
[ 77.148] (II) intel(0): 195054bfef80714f81908180818c0101
[ 77.148] (II) intel(0): 010101010101302a009851002a403070
[ 77.148] (II) intel(0): 1300520e1100001ed50980a0205e6310
[ 77.148] (II) intel(0): 1060520830e41000001a000000fd0038
[ 77.148] (II) intel(0): 4b1f510e000a202020202020000000fc
[ 77.148] (II) intel(0): 0042656e51204650373331a02020008b
[ 77.148] (II) intel(0): Printing probed modes for output VGA1
[ 77.148] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 77.148] (II) intel(0): Modeline "1280x1024"x76.0 141.81 1280 1376 1512
1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 77.148] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 77.148] (II) intel(0): Modeline "1280x1024"x72.0 132.84 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 77.148] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 77.148] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 77.148] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 77.148] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 77.148] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 77.148] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 77.148] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 77.148] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 77.148] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 77.148] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 77.148] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 77.148] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 77.148] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 77.148] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 77.148] (II) intel(0): Modeline "640x350"x70.1 25.17 640 656 752 800
350 387 389 449 +hsync -vsync (31.5 kHz e)
[ 77.150] (II) intel(0): EDID for output HDMI1
[ 77.150] (II) intel(0): EDID for output DP1
[ 77.150] (II) intel(0): Output VGA1 connected
[ 77.150] (II) intel(0): Output HDMI1 disconnected
[ 77.150] (II) intel(0): Output DP1 disconnected
[ 77.150] (II) intel(0): Using exact sizes for initial modes
[ 77.150] (II) intel(0): Output VGA1 using initial mode 1280x1024 +0+0 [
77.150] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise
stated.
[ 77.150] (II) intel(0): Kernel page flipping support detected, enabling [
77.150] (==) intel(0): DPI set to (96, 96)
[ 77.150] (II) Loading sub module "fb"
[ 77.150] (II) LoadModule: "fb"
[ 77.150] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 77.162] (II) Module fb: vendor="X.Org Foundation"
[ 77.162] compiled for 1.15.0, module version = 1.0.0
[ 77.162] ABI class: X.Org ANSI C Emulation, version 0.4
[ 77.162] (II) Loading sub module "dri2"
[ 77.162] (II) LoadModule: "dri2"
[ 77.162] (II) Module "dri2" already built-in
[ 77.162] (II) UnloadModule: "modesetting"
[ 77.162] (II) Unloading modesetting
[ 77.162] (II) UnloadModule: "fbdev"
[ 77.162] (II) Unloading fbdev
[ 77.162] (II) UnloadSubModule: "fbdevhw"
[ 77.162] (II) Unloading fbdevhw
[ 77.162] (II) UnloadModule: "vesa"
[ 77.162] (II) Unloading vesa
[ 77.162] (==) Depth 24 pixmap format is 32 bpp
[ 77.172] (II) intel(0): [DRI2] Setup complete
[ 77.172] (II) intel(0): [DRI2] DRI driver: i965
[ 77.172] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120,
tiled
[ 77.183] (II) UXA(0): Driver registered support for the following operations:
[ 77.183] (II) solid
[ 77.183] (II) copy
[ 77.183] (II) composite (RENDER acceleration)
[ 77.183] (II) put_image
[ 77.183] (II) get_image
[ 77.183] (==) intel(0): Backing store enabled
[ 77.183] (==) intel(0): Silken mouse enabled
[ 77.183] (II) intel(0): Initializing HW Cursor
[ 77.183] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 77.183] (==) intel(0): DPMS enabled
[ 77.183] (==) intel(0): Intel XvMC decoder enabled
[ 77.183] (II) intel(0): Set up textured video
[ 77.183] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 77.183] (II) intel(0): direct rendering: DRI2 Enabled
[ 77.183] (==) intel(0): hotplug detection: "enabled"
[ 77.191] (--) RandR disabled
[ 77.196] (II) SELinux: Disabled by boolean
[ 77.319] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 77.319] (II) AIGLX: enabled GLX_ARB_create_context
[ 77.319] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 77.319] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [
77.319] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 77.319] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[ 77.319] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 77.319] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 77.319] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 77.319] (II) AIGLX: Loaded and initialized i965
[ 77.319] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 77.319] (II) intel(0): Setting screen physical size to 338 x 270 [
77.653] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 77.653] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 77.653] (**) Power Button: Applying InputClass "system-keyboard" [
77.653] (II) LoadModule: "evdev"
[ 77.653] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [
77.658] (II) Module evdev: vendor="X.Org Foundation"
[ 77.658] compiled for 1.15.0, module version = 2.8.2
[ 77.658] Module class: X.Org XInput Driver
[ 77.658] ABI class: X.Org XInput driver, version 20.0
[ 77.658] (II) Using input driver 'evdev' for 'Power Button'
[ 77.658] (**) Power Button: always reports core events
[ 77.658] (**) evdev: Power Button: Device: "/dev/input/event1" [
77.658] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 77.658] (--) evdev: Power Button: Found keys
[ 77.658] (II) evdev: Power Button: Configuring as keyboard
[ 77.658] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 77.658] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 77.658] (**) Option "xkb_rules" "evdev"
[ 77.658] (**) Option "xkb_model" "pc104"
[ 77.658] (**) Option "xkb_layout" "us,gb"
[ 77.658] (**) Option "xkb_variant" ","
[ 77.700] (II) config/udev: Adding input device Video Bus
(/dev/input/event2)
[ 77.700] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [
77.700] (**) Video Bus: Applying InputClass "system-keyboard" [ 77.700]
(II) Using input driver 'evdev' for 'Video Bus'
[ 77.700] (**) Video Bus: always reports core events
[ 77.700] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 77.700] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 77.700] (--) evdev: Video Bus: Found keys
[ 77.700] (II) evdev: Video Bus: Configuring as keyboard
[ 77.700] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
[ 77.700] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[ 77.700] (**) Option "xkb_rules" "evdev"
[ 77.700] (**) Option "xkb_model" "pc104"
[ 77.700] (**) Option "xkb_layout" "us,gb"
[ 77.700] (**) Option "xkb_variant" ","
[ 77.700] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 77.700] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 77.700] (**) Power Button: Applying InputClass "system-keyboard" [
77.700] (II) Using input driver 'evdev' for 'Power Button'
[ 77.700] (**) Power Button: always reports core events
[ 77.700] (**) evdev: Power Button: Device: "/dev/input/event0" [
77.700] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 77.700] (--) evdev: Power Button: Found keys
[ 77.700] (II) evdev: Power Button: Configuring as keyboard
[ 77.700] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0/event0"
[ 77.700] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 8)
[ 77.700] (**) Option "xkb_rules" "evdev"
[ 77.700] (**) Option "xkb_model" "pc104"
[ 77.700] (**) Option "xkb_layout" "us,gb"
[ 77.701] (**) Option "xkb_variant" ","
[ 77.701] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 77.701] (II) config/udev: Adding input device HID 0b38:000e
(/dev/input/event3)
[ 77.701] (**) HID 0b38:000e: Applying InputClass "evdev keyboard catchall"
[ 77.701] (**) HID 0b38:000e: Applying InputClass "system-keyboard" [
77.701] (II) Using input driver 'evdev' for 'HID 0b38:000e'
[ 77.701] (**) HID 0b38:000e: always reports core events
[ 77.701] (**) evdev: HID 0b38:000e: Device: "/dev/input/event3" [
77.701] (--) evdev: HID 0b38:000e: Vendor 0xb38 Product 0xe
[ 77.701] (--) evdev: HID 0b38:000e: Found keys
[ 77.701] (II) evdev: HID 0b38:000e: Configuring as keyboard
[ 77.701] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3/event3"
[ 77.701] (II) XINPUT: Adding extended input device "HID 0b38:000e" (type:
KEYBOARD, id 9)
[ 77.701] (**) Option "xkb_rules" "evdev"
[ 77.701] (**) Option "xkb_model" "pc104"
[ 77.701] (**) Option "xkb_layout" "us,gb"
[ 77.701] (**) Option "xkb_variant" ","
[ 77.702] (II) config/udev: Adding input device HID 0b38:000e
(/dev/input/event4)
[ 77.702] (**) HID 0b38:000e: Applying InputClass "evdev keyboard catchall"
[ 77.702] (**) HID 0b38:000e: Applying InputClass "system-keyboard" [
77.702] (II) Using input driver 'evdev' for 'HID 0b38:000e'
[ 77.702] (**) HID 0b38:000e: always reports core events
[ 77.702] (**) evdev: HID 0b38:000e: Device: "/dev/input/event4" [
77.702] (--) evdev: HID 0b38:000e: Vendor 0xb38 Product 0xe
[ 77.702] (--) evdev: HID 0b38:000e: Found 1 mouse buttons
[ 77.702] (--) evdev: HID 0b38:000e: Found scroll wheel(s)
[ 77.702] (--) evdev: HID 0b38:000e: Found relative axes
[ 77.702] (II) evdev: HID 0b38:000e: Forcing relative x/y axes to exist. [
77.702] (--) evdev: HID 0b38:000e: Found absolute axes
[ 77.702] (II) evdev: HID 0b38:000e: Forcing absolute x/y axes to exist. [
77.702] (--) evdev: HID 0b38:000e: Found keys
[ 77.702] (II) evdev: HID 0b38:000e: Configuring as mouse
[ 77.702] (II) evdev: HID 0b38:000e: Configuring as keyboard
[ 77.702] (II) evdev: HID 0b38:000e: Adding scrollwheel support [
77.702] (**) evdev: HID 0b38:000e: YAxisMapping: buttons 4 and 5 [ 77.702]
(**) evdev: HID 0b38:000e: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 77.702] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4/event4"
[ 77.702] (II) XINPUT: Adding extended input device "HID 0b38:000e" (type:
KEYBOARD, id 10)
[ 77.702] (**) Option "xkb_rules" "evdev"
[ 77.702] (**) Option "xkb_model" "pc104"
[ 77.702] (**) Option "xkb_layout" "us,gb"
[ 77.702] (**) Option "xkb_variant" ","
[ 77.702] (II) evdev: HID 0b38:000e: initialized for relative axes. [
77.702] (WW) evdev: HID 0b38:000e: ignoring absolute axes.
[ 77.702] (**) HID 0b38:000e: (accel) keeping acceleration scheme 1 [
77.702] (**) HID 0b38:000e: (accel) acceleration profile 0
[ 77.702] (**) HID 0b38:000e: (accel) acceleration factor: 2.000 [
77.702] (**) HID 0b38:000e: (accel) acceleration threshold: 4 [ 77.702]
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[ 77.702] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 77.702] (II) Using input driver 'evdev' for 'USB Optical Mouse' [
77.702] (**) USB Optical Mouse: always reports core events
[ 77.702] (**) evdev: USB Optical Mouse: Device: "/dev/input/event5" [
77.702] (--) evdev: USB Optical Mouse: Vendor 0x192f Product 0x916 [
77.702] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 77.702] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 77.702] (--) evdev: USB Optical Mouse: Found relative axes
[ 77.702] (--) evdev: USB Optical Mouse: Found x and y relative axes [
77.702] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 77.702] (II) evdev: USB Optical Mouse: Adding scrollwheel support [
77.702] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5 [
77.702] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 77.702] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5/event5"
[ 77.702] (II) XINPUT: Adding extended input device "USB Optical Mouse"
(type: MOUSE, id 11)
[ 77.703] (II) evdev: USB Optical Mouse: initialized for relative axes. [
77.703] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [
77.703] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 77.703]
(**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 77.703] (**)
USB Optical Mouse: (accel) acceleration threshold: 4 [ 77.703] (II)
config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 77.703] (II) No input driver specified, ignoring this device. [
77.703] (II) This device may have been added with another device file. [
77.703] (II) config/udev: Adding input device HDA Intel Rear Mic
(/dev/input/event10)
[ 77.703] (II) No input driver specified, ignoring this device. [
77.703] (II) This device may have been added with another device file. [
77.703] (II) config/udev: Adding input device HDA Intel Front Mic
(/dev/input/event11)
[ 77.703] (II) No input driver specified, ignoring this device. [
77.703] (II) This device may have been added with another device file. [
77.703] (II) config/udev: Adding input device HDA Intel Front Headphone
(/dev/input/event7)
[ 77.703] (II) No input driver specified, ignoring this device. [
77.703] (II) This device may have been added with another device file. [
77.704] (II) config/udev: Adding input device HDA Intel Line Out
(/dev/input/event8)
[ 77.704] (II) No input driver specified, ignoring this device. [
77.704] (II) This device may have been added with another device file. [
77.704] (II) config/udev: Adding input device HDA Intel Line
(/dev/input/event9)
[ 77.704] (II) No input driver specified, ignoring this device. [
77.704] (II) This device may have been added with another device file. [
77.704] (II) config/udev: Adding input device PC Speaker
(/dev/input/event6)
[ 77.704] (II) No input driver specified, ignoring this device. [
77.704] (II) This device may have been added with another device file. [
78.284] (II) evdev: USB Optical Mouse: Close
[ 78.284] (II) UnloadModule: "evdev"
[ 78.284] (II) evdev: HID 0b38:000e: Close
[ 78.284] (II) UnloadModule: "evdev"
[ 78.284] (II) evdev: HID 0b38:000e: Close
[ 78.284] (II) UnloadModule: "evdev"
[ 78.284] (II) evdev: Power Button: Close
[ 78.284] (II) UnloadModule: "evdev"
[ 78.284] (II) evdev: Video Bus: Close
[ 78.284] (II) UnloadModule: "evdev"
[ 78.284] (II) evdev: Power Button: Close
[ 78.284] (II) UnloadModule: "evdev"
[ 78.356] (EE) Server terminated successfully (0). Closing log file
So, what is going one? Does this Desktop work for anyone else without gnome3
installed? What am I leaving out? Am I suppose run some sort of X
configuration program?
--
*** E-Mail is NOT a SECURE channel ***
James B. Byrne mailto:ByrneJB@xxxxxxxxxxxxx
Harte & Lyne Limited http://www.harte-lyne.ca
9 Brockley Drive vox: +1 905 561 1241
Hamilton, Ontario fax: +1 905 561 0757
Canada L8E 3C3
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
