every so often, I'm seeing these in my dmesg output, and I'm not sure
what they are?
host[32625]: segfault at 0 ip 000000000040abb8 sp 00007ff59d36bd40 error
4 in host[400000+1b000]
host[24560]: segfault at 0 ip 000000000040abb8 sp 00007f4fa1c4bd40 error
4 in host[400000+1b000]
host[8354]: segfault at 0 ip 000000000040abb8 sp 00007fa07330dd40 error
4 in host[400000+1b000]
in situ, the tail of dmesg looks like...
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000
KB/sec) for data-check.
md: using 128k window, over a total of 1953383232k.
md: md0: data-check done.
host[8758]: segfault at 0 ip 000000000040abb8 sp 00007f9b7914ed40 error
4 in host[400000+1b000]
host[15122]: segfault at 0 ip 000000000040abb8 sp 00007f63edccad40 error
4 in host[400000+1b000]
UDP: bad checksum. From 71.6.167.142:40000 to 207.111.214.246:44818 ulen 32
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000
KB/sec) for data-check.
md: using 128k window, over a total of 1953383232k.
md: md0: data-check done.
host[32625]: segfault at 0 ip 000000000040abb8 sp 00007ff59d36bd40 error
4 in host[400000+1b000]
host[24560]: segfault at 0 ip 000000000040abb8 sp 00007f4fa1c4bd40 error
4 in host[400000+1b000]
host[8354]: segfault at 0 ip 000000000040abb8 sp 00007fa07330dd40 error
4 in host[400000+1b000]
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000
KB/sec) for data-check.
md: using 128k window, over a total of 1953383232k.
md: md0: data-check done.
--
john r pierce 37N 122W
somewhere on the middle of the left coast
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
