(apologies for the length - there are questions at the end...)
I've been running Linux for 20 years, and done a lot of dual-boots. I know
that's old-school now, but I run Linux 95% of the time yet don't want to
lose a Windows system I've paid for - but I've never tried removing it
from a system and reinstalling the same licenced copy inside a virtual machine.
I bought a new laptop back in April this year, after trying to check
online for Linux certification to match what was in the local stores.
There's so many models and variants that's almost impossible, but I found
various "HP Pavilion 14" in www.ubuntu.com/certification
and a couple of "HP EliteBook" in hardware.redhat.com/laptop.
So I bought an "HP Pavilion 14-n228ca TouchSmart Notebook",
which came with Windows 8.1 installed.
So I start off doing what I've done on previous occasions - get into the
BIOS, change the boot order, boot a CentOS 6 installation CD as used on
my desktop, go into rescue mode and look at the partitions. Normally I'd
use fdisk, but that says it doesn't understand GPT and I should use
parted. There's 5 partitions, so I use resizefs to shrink the main NTFS
data partition, then delete the partition and recreate it shorter at the
same start location. Then reboot the CD into install mode, create a
Linux partition in the free space, and install CentOS, which adds a
choice of "Other" in grub.conf to boot Windows.
Then I boot CentOS and finish the install - a couple of glitches; it needs
a kernel parameter "iommu=soft" to get the USB mouse to work
("nommu_map_single overflow" messages), and it needs a firmware file
rt3290.bin for the RT3290 WiFi chip to work (submitted bug 1133288).
Then I try to boot into Windows. From GRUB, I get a screen "windows boot
manager" with an error message "file \Boot\BCD - missing or contains
errors".
The boot sequence is a bit weird compared to what I'm used to - this is my
first machine with UEFI. The BIOS has a UEFI boot order and a legacy boot
order, which has to be enabled. UEFI takes precedence. With legacy
enabled, F9 gives a boot menu with
OS boot Manager
Boot from EFI file
Notebook hard drive
Internal CD/DVD ROM Drive
"Notebook hard drive" takes me to GRUB.
"EFI file" takes me walkabout on a Windows file system with folders like
"HP", "Boot", Windows" and what looks like hundreds of locale files -
maybe I can boot in Turkish.
"OS boot Manager" takes me to an HP/Windows system recovery screen with
various options - continue, troubleshoot, turn off.
"continue" goes to a splash screen like "attempting to repair" which
fails. "troubleshoot" has a command prompt option. That's running Windows
cmd.exe in one of the other partitions, mounted as X:
In that, I find commands "chkdsk", "diskpart", "bootrec", "bcdedit" etc.
To cut an even longer story short, I did something like:
X:\ diskpart
diskpart> select disk 0
diskpart> select partition 4 (the NTFS system one)
diskpart> set id=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
X:\ bcdedit /set {default} device partition=C:
X:\ bcdedit /set {default} osdevice partition=C:
X:\ bootrec /rebuildbcd
After doing that, the system partition appears as C:, passes chkdsk, and
the system boots successfully into Windows.
3 questions:
- what should I have done instead to create a dual-boot system on this
hardware (the above is ridiculous and took hours of trials and research)
- how can I make CentOS boot by default (since there is a valid EFI
record for Windows 8, that seems to take preference unless I hit F9 at
boot and manually select the disk)
- is it possible to make CentOS boot via EFI rather than from the legacy
partition boot record ?
- how can I make Windows boot from GRUB ? (I tried
"bcdedit /export C:\Boot\BCD", but that did not help - or I have the
wrong file or syntax)
Some documentation refers to a tool in Windows 8 called "EasyBCD", but I
can't find it in my system.
--
Andrew Daviel, TRIUMF, Canada
Tel. +1 (604) 222-7376 (Pacific Time)
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
