Re: Balancing IRQs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



W dniu 2014-07-29 08:16, Jatin Davey pisze:
> Hi All
>
> I am using the following Linux version for my application:
>
> ****************************************
> [root@localhost ~]# uname -a
> Linux localhost.localdom 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 
> 2009 x86_64 x86_64 x86_64 GNU/Linux
> ****************************************
>
> ****************************************
> [root@localhost ~]# cat /etc/*release
> CentOS release 5.4 (Final)
> ****************************************
>
> When my application is running on the server i can see only one core 
> being used heavily while the other cores are not being used much. My 
> application has a major workload is collecting data from the eth0 
> interface and then doing a lot of processing with the data in the 
> database. So i can say that the Disk I/O and Network I/O are the major 
> contributors towards the workload.
>
> from the /proc/interrupts file i can see the following:
>
> ****************************************************
> [root@localhost ~]# cat /proc/interrupts
>             CPU0       CPU1       CPU2       CPU3
>    0:   16084980          0          0          0    IO-APIC-edge timer
>    1:        141          0          0          0    IO-APIC-edge i8042
>    6:          5          0          0          0    IO-APIC-edge floppy
>    7:          0          0          0          0    IO-APIC-edge parport0
>    8:          0          0          0          0    IO-APIC-edge rtc
>    9:          0          0          0          0   IO-APIC-level acpi
>   12:        251          0          0          0    IO-APIC-edge i8042
>   51:    2410224          0          0          0   IO-APIC-level ioc0
>   59:   11358257          0          0          0   IO-APIC-level eth0
> NMI:          0          0          0          0
> LOC:   16086147   16090336   16090320   16089691
> ERR:          0
> MIS:          0
> ****************************************************
>
>  From the above output i can see that all the interrupts are hitting the 
> cpu0 and thats why it is used more than any other core in the system.
>
> Can someone please help me in distributing the interrupts across all the 
> cores so that all are used which will eventually result in a better 
> performance of my system.
>
> Appreciate your response in this regard.
Hi.

Just use service irq balance: irqbalance from base repo of centos 5

IP
 
> Thanks
> Jatin
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux