Re: freebsd hangs when install on centos6.5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi
I took the following note when installng freeBSD on VirtualBox:

Installation in VirtualBox:

from
http://www.freebsd.org/
get a boot-install CDROM and burn it to a disk, because mounting the ISO 
file at installation-start does not work with freeBSD, you get a 
kernel-panic immediately. As installation source give one of the 
freebsd.org webs, Also, it is useless to copy an entire distribution to 
a local disk, using this as installation source woun't work either.

Possibly it may help you also on kvm.

suomi


On 2014-05-27 08:31, Jarod. w wrote:
> Hi, All
>
>      The freebsd(version: 10.0, RC3) can't be installed as kvm guest based on
> CentOS 6.5(kernel: kernel-2.6.32-431.17.1.el6.x86_64, qemu-kvm:
> qemu-kvm-0.12.1.2
> -2.415.el6_5.8.x86_64). When installing it, it always shows 'booting' and
> hangs.
>
>      My cpu&memory information:
>          CPU: Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz
>          Mem:     132189664
>
>      My qemu-kvm command:
>          /usr/libexec/qemu-kvm -name testbsd -M rhel6.5.0 -enable-kvm -m
> 2048 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -uuid
> 7f68743b-d725-4c7d-dc7e-9aa6712584b3 -drive
> file=/home/vAPV/test.img,if=none,id=drive-ide0-0-0,format=qcow2,cache=none
> -vnc 0.0.0.0:0 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4
> --cdrom /home/downloads/FreeBSD-10.0-RC3-amd64-dvd1.iso
>
>
>      Any suggestions?
>      Thanks in advance..
>
>
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux