Re: Format big drives (4TB) in the installer?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 05/07/2014 05:31 PM, CS_DBA wrote:
> Thanks for the advice, can someone point me to a good step by step how
> to per setting up a RAID 10 volume per the parted & GPT tools?
>

You might find this usefull, text on official CentOS Facebook group. GPT 
is separate from RAID's, so GPT is not covered, but RAID part should be 
the same:
https://www.facebook.com/notes/centos/software-raid-on-rhel-6/10151254589767728

Original text is here:
https://linux.dell.com/files/whitepapers/Software_RAID_on_Red_Hat_Enterprise_Linux_v6.pdf



For RAID10 I suggest far 2, and boot regular raid1

Creating Boot RAID1:
[root@kancelarija]# mdadm --create /dev/md9 --level=1 --raid-disks=2 
/dev/sdd1 /dev/sde1 --metadata=0.90

Creating RAID10 far,2:

[root@kancelarija]# mdadm --create /dev/md9 --level=10 --layout=f2 
--raid-disks=2 /dev/sdd9 /dev/sde9



-- 
Ljubomir Ljubojevic
(Love is in the Air)
PL Computers
Serbia, Europe

StarOS, Mikrotik and CentOS/RHEL/Linux consultant
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux