Re: [SOLVED] kvm libvirt vms import

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi list,
I've ridden carefully the reported error. Seems to be some features from 
qcow2 format image (create with a newer version of qemu-kvm) that can't 
be used with qemu version shipped with centos 6.5.

To accomplish my work, I've followed a chain of conversions.
I've copied the image on a guest with a newer version of qemu-kvm and 
converted all qcow2 image in a raw format. Then on CentOS, I've 
reconverted them in a qcow2 format (this time with supported features) 
and I've started them without problems.

At the end:

[qcow2 featured] [conversion qemu 1.7.0] -> [raw] -> [conversion with 
centos qemu-img] -> [qcow2 supported].

Solved.


Il 05/05/2014 12:58, Alessandro Baggi ha scritto:
> Hi there,
> I'm new to Centos. I've installed version 6.5 x86_64. I'm coming from
> slackware/debian utilizzation environment. I'm trying to setup libvirt
> and qemu-kvm, but I have some problems.
>
> I've different vms (2 centos, 2 slackware, 3 Debian) and I'm trying to
> import all of them.
> I want prefix that all of them was created from debian host and vdisk
> had bus=sata and format=qcow2.
>
> Importing debian I've no problem with the following command:
>
>
> # virt-install -n DEB -r 1024 --vcpus=2 --accelerate --os-type=linux
> --os-variant=debianwheezy --disk
> path=/path/to/deb.img,format=qcow2,bus=ide,cache=writeback --import
> --network=bridge:br0 --vnc -v
>
>
> It starts and works fine.
>
> Importing Centos 6.5 with the following command:
>
> # virt-install -n CENT1 -r 1024 --vcpus=2 --os-type=linux
> --os-variant=rhel6 --accelerate --disk
> path=/path/to/cent.img,format=qcow2,bus=ide,cache=writeback --import
> --network=bridge:br0 --vnc -v
>
> return an error:
>
> Starting install...
> ERROR    errore interno Process exited while reading console log output:
> char device redirected to /dev/pts/3
> qemu-kvm: -drive
> file=/mnt/dati/qemu-system/CENTOS1/cent.img,if=none,id=drive-ide0-0-0,format=qcow2,cache=writeback:
> 'drive-ide0-0-0' uses a qcow2 feature which is not supported by this
> qemu version: QCOW version 3
> qemu-kvm: -drive
> file=/mnt/dati/qemu-system/CENTOS1/cent.img,if=none,id=drive-ide0-0-0,format=qcow2,cache=writeback:
> could not open disk image /mnt/dati/qemu-system/CENTOS1/cent.img:
> Operation not supported
>
> Domain installation does not appear to have been successful.
>
>
> I've tried also to remove disk options and set to virtio,scsi. It starts
> but says "no bootable disk".
>
> The same happens with slackware 14.1 without --os-type and --os-variant.
>
> Always, trying delete cent.img and recreate it, all works with the same
> option (but is not so good, because I must reinstall all).
>
> On my new centos installation I have qemu-kvm-0.12.1.2, on the last
> Slackware system I had qemu-1.7.0 and on Debian 1.1.2+dfsg-6+deb7u2.
>
> I've also tried to reimport them on another system with Slackware and
> have no problem.
>
> Maybe there is a problem with version of qemu-kvm tools or some problem
> with img. It's possible?
>
> I can't get the real problem. Can someone point me in the right direction?
>
>
> Thanks in advance.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux