Re: LUN larger than allowed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



William Kwan wrote:
> It is a DL380p G8
>
> RAID controller is a HP Smart Array P420i Controller with firmware 4.66
>
Got a 380 G5 here I just set up in the last couple of weeks. P800
controller for the Smart Array, external, and a P400 for the local drives.
I note in /var/log/dmesg that scsi0 and scsi1 are both using ata_piix to
drive them.

You *are* looking at /dev/cciss, right?

          mark
>
>
>
>
> On Monday, March 3, 2014 2:28 PM, William Kwan <potatok@xxxxxxxxx> wrote:
>
> Hi all,
>
> running 6.5 on a HP DL380p with a few logical drive created with the
> onboard RAID.  I see these when the system boot.  How can I fix this?
>
> scsi: host 2 channel 0 id 0 lun4194304 has a LUN larger than allowed by
> the host adapter
> scsi: host 2 channel 0 id 0 lun4194560 has a LUN larger than allowed by
> the host adapter
> scsi: host 2 channel 0 id 0 lun4194816 has a LUN larger than allowed by
> the host adapter
> scsi: host 2 channel 0 id 0 lun4195072 has a LUN larger than allowed by
> the host adapter
>
> Thanks
> W
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos





[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux