Re: ata marvel errors after kernel upgrade

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri, 24 Jan 2014, John R Pierce wrote:

> On 1/24/2014 12:54 AM, Steve Brooks wrote:
>> [root@mach~]# sginfo /dev/scanner
>> INQUIRY response (cmd: 0x12)
>> ----------------------------
>> Device Type                        3
>> Vendor:                    Marvell
>> Product:                   91xx Config
>> Revision level:            1.01
>
> fwiw, scsi device type '3' is a 'processor', which I'm guessing is a
> backplane controller ?   not sure why it has a dev node

Hmm not sure, so far it does not seem to be causing any issues but on the 
other hand I would feel better if I knew for sure exactly why it was 
there.

This machine does have an adaptec hardware raid card which presents as 
"/dev/sda". The "OS" is on "/dev/sdb" which is connected to an INTEL
  C600/X79 SATA chipset via an Icy Dock HD enclosure.

Steve

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux