Re: died again

[John R Pierce <pierce@xxxxxxxxxxxx>]

On 12/16/2013 10:03 AM, John R Pierce wrote:
> On 12/16/2013 8:56 AM, Michael Hennebry wrote:
>> >>From this, I infer that 20-pin ATX's are sufficiently standardized
>> >that I do not need to be model- or brand-specific.
> well, ATX 1.x stuff had more 5V and less 12V, while ATX 2.x boosts the
> 12V output capacity and has less 5V...   I'm pretty sure even a AGP/PCI
> P4 is ATX 2.0, but I suppose I could be wrong.    We're stirring some
> mighty old neurons here.  I ejunked all my P4's some time ago.

ok, I googled it, the manual for your motherboard says "ATX12V", which 
is close enough the 2.x spec that it should work.  I do see a suggestion 
that you use a somewhat higher 'wattage' ATX12V 2.x PSU to compensate 
for the differences.

btw, here's the technical product manual for your mainboard
http://downloadmirror.intel.com/15207/eng/D865GBF_D865GLC_ProductGuide02_English.pdf


-- 
john r pierce                                      37N 122W
somewhere on the middle of the left coast

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos