Hi Cliff, theer is just one path; I rechecked. The storage and server are attached currently direct with one twinaxial cable and just one ip on each side. Multipathing was never configured. I'm confused. Currently I reattached the targets and reformatted the devices. in dmesg I just see one sdb and one sdc. sda is the internal disk and no more disk devices show up e.g. with fdisk -l. Any more suggestions or thoughts? /Götz Am 26.11.13 23:08, schrieb Cliff Pratt: > Looks like you have more than one path to the devices. I would expect to > see *4* devices. > > Cheers, > > Cliff > > > On Wed, Nov 27, 2013 at 2:36 AM, Götz Reinicke - IT Koordinator < > goetz.reinicke@xxxxxxxxxxxxxxx> wrote: > >> Hi, >> >> I do have an iscsi storage with two raidsets. I'm logged in to the >> target and get two devices: /dev/sdb and /dev/sdc. >> >> After formatting the devices with ext4 I realised, that I had used a >> wrong label, so I tried to relabel the devices. >> >> But now I'm confused: >> >> doing a e2label /dev/sdb or /dev/sdc returns always the same label name >> for both devices. >> >> so I did "e2label /dev/sdb students" and "e2label /dev/sdc staff" and >> now mounting the devices shows the same filesystem under sdb and sdc! >> >> Looks like sdc (an empty device) is gone... >> >> >> Any suggestions or explanations? >> >> Thanks and best regards . Götz <...> -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 E-Mail goetz.reinicke@xxxxxxxxxxxxxxx Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
