On Sat, Oct 26, 2013 at 7:26 PM, Gregory P. Ennis +ADw-PoMec+AEA-pomec.net+AD4 wrote: +AD4 I have a new install of CentOS 6.4 on an HP Pavilion 500-27c with one +AD4 mother board nic card. +AD4 +AD4 results of lspci : +AD4 01:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit +AD4 Ethernet (rev 10) +AD4 04:00.0 Network controller: Ralink corp. Device 539b Please take a look at ELRepo's FAQ +ACM-4 ( http://elrepo.org/tiki/FAQ ) and determine the vendor:device ID pairing. It will help you find an appropriate driver. Akemi +AF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXw Akemi, That seemed to be a good start. I determined that there were three rpm's that satisfied the id pairing : kmod-alx-0.0-2.20121003.el6.elrepo.x86+AF8-64.rpm 22-Dec-2012 12:32 77K kmod-alx-0.0-6.el6.elrepo.x86+AF8-64.rpm 17-Jul-2013 21:58 32K kmod-alx-0.0-7.el6.elrepo.x86+AF8-64.rpm 30-Jul-2013 00:58 32K I installed the first one and the system would not boot. I am in the process of reinstalling 6.4 and will try the 0.0.7 next. Greg -------------------------------------------------------- Akemi, kmod-alx-0.0.7 was the rpm that worked. I had to rebuild the entire os, and then had to add the /etc/sysconfig/network file, but after these steps I got it to work. Thanks much for your assistance+ACEAIQAhACEAIQAh Greg +AF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXw CentOS mailing list CentOS+AEA-centos.org http://lists.centos.org/mailman/listinfo/centos
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
