Re: CentOS 6 kernel > 2.6.32-279 won't boot on ABIT AB9

[Akemi Yagi <amyagi@xxxxxxxxx>]

On Thu, Oct 24, 2013 at 12:47 PM, Tony Schreiner
<anthony.schreiner@xxxxxx> wrote:

> I had used the the 6.3 net installer disk (and the 6.4 repo) which I noticed had kernel 2.6.32-279, so I retrieved that kernel from the vault and it works.
>
> The  279 and earlier kernels don't display any ipmi messages during boot (in dmesg)
> The system is not ipmi capable I don't believe, should I be looking there?

Try adding the following kernel parameters and see if the 6.4 kernel boots:

ipmi_si.tryacpi=0 ipmi_si.trydmi=0 ipmi_si.trydefaults=0

Akemi
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos