Re: Centos 6.4 - doesnt power off with shutdown/poweroff cmd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I have the latest bios installed - DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7596/785GM-E51 (MS-7596), BIOS V2.12 02/18/2011

However, I just used the ELRepo to install kernel-ml  (Linux version 3.11.4-1.el6.elrepo.x86_64) and it shuts down fine,.. Of course, it has other errors - lol

So I'm leaning toward it’s a kernel bug with these kernel-2.6.32-358.18.1.el6.x86_64 and kernel-2.6.32-358.el6.x86_64 (the two installed by default)

Now I'm going to try to locate the kernel version list so I can see if I can get a smaller jump in version up to test with.

kernel-ml-3.11.4-1.el6.elrepo.x86_64 worked as expected on the shutdown, but has some other issues.

-----Original Message-----
From: centos-bounces@xxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxx] On Behalf Of James A. Peltier
Sent: Friday, October 11, 2013 6:58 PM
To: CentOS mailing list
Subject: Re:  Centos 6.4 - doesnt power off with shutdown/poweroff cmd

Update your BIOS if there is one.  I've found that to often be the cause.

----- Original Message -----
| Same result, doesn't turn off.
| 
| Any other ideas?
| 
| -----Original Message-----
| From: centos-bounces@xxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxx] On 
| Behalf Of Andrew Wyatt
| Sent: Friday, October 11, 2013 4:41 PM
| To: CentOS mailing list
| Subject: Re:  Centos 6.4 - doesnt power off with 
| shutdown/poweroff cmd
| 
| Try using the reboot=pci grub parameter.
| 
| 
| On Fri, Oct 11, 2013 at 11:40 AM, Terre Porter 
| <tporter@xxxxxxxxxxxxxxxxxxxx
| > wrote:
| 
| > Hello,
| >
| >
| >
| > I'm looking for help figuring out why I am having problems with 
| > shutting down a machine.
| >
| >
| >
| > I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's 
| > and both power down without issues.
| >
| >
| >
| > I added acpi.debug_level=1 to the grub boot as it was suggested to 
| > see more info about ACPI in the logs
| >
| >
| >
| > I found the following ACPI Errors in the /var/log/messages
| >
| >
| >
| > Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN] 
| > Namespace lookup failure, AE_NOT_FOUND
| >
| > Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method 
| > parse/execution failed [\] (Node ffffffff81fdbeb0), AE_NOT_FOUND
| >
| >
| >
| > Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io 
| > 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
| >
| > Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available 
| > for this device, you should use it instead of the native driver
| >
| >
| >
| > I used the Centos 6.4 Live CD last night with no hard drive in the 
| > system.
| >
| >
| >
| > I photo'd the shutdown, here is the type up:
| >
| >
| >
| > Sending all processes the TERM signal...
| >
| > Sendng all processes the KILL signal...
| >
| > Saving random seed:
| >
| > Syncing hardware clock to system time
| >
| > Turning off quotas:
| >
| > umount2: Device or resource busy
| >
| > umount: /dev/.initramfs/live: device is busy.
| >
| >                 (In some cases useful info about processes that use
| >
| >                  the device is found by lsof(8) or fuser(11))
| >
| > init: Re-executing /sbin/init
| >
| > Halting System...
| >
| > r8169 0000:02:00.0: PME# enabled
| >
| > ACPI: Preparing to enter system sleep state S5
| >
| > ACPI Error (psargs-0359): [PPTS] Namespace lookup failure, 
| > AE_NOT_FOUND
| >
| > ACPI Error (psparse-0537): Method parse/execution failed 
| > [\_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND
| >
| > ACPI Error (psparse-0537): Method parse/execution failed [\PTS_] 
| > (Node ffff88019d043560), AE_NOT_FOUND
| >
| > ACPI Error (psparse-0537): Method parse/execution failed [\_PTS] 
| > (Node ffff88019dbcf9e8), AE_NOT_FOUND
| >
| > Disabling non-boot CPUS...
| >
| > SMP alternatives: switching to UP code
| >
| > Power Down.
| >
| > acpi_power_off called
| >
| >
| >
| > The system doesn't power off, it just sits there. I have to hold the 
| > power button in for it to shut down.
| >
| >
| >
| > The same still occurs with a completed a fresh minimum install of 
| > Centos 6.4, installed the EPEL repo and did yum update.
| >
| >
| >
| > I'm running the latest bios for the motherboard, and even tried 
| > going back one version.
| >
| >
| >
| > MB: 785GM-E51 (MS-7596 1.2)
| >
| > CPU: AMD Phenom II x4 945 3ghz
| >
| > 1TB HD, 6 Gig Mem
| >
| >
| >
| > Any ideas?
| >
| >
| >
| > (Besides using a baseball bat - I am considering it)
| >
| >
| >
| > Here is some hardware info from the getinfo.sh script listed the 
| > forums.
| >
| >
| >
| > == BEGIN uname -rmi ==
| >
| > 2.6.32-358.18.1.el6.x86_64 x86_64 x86_64
| >
| > == END   uname -rmi ==
| >
| >
| >
| > == BEGIN rpm -qa \*-release\* ==
| >
| > centos-release-6-4.el6.centos.10.x86_64
| >
| > epel-release-6-8.noarch
| >
| > == END   rpm -qa \*-release\* ==
| >
| >
| >
| > == BEGIN cat /etc/redhat-release ==
| >
| > CentOS release 6.4 (Final)
| >
| > == END   cat /etc/redhat-release ==
| >
| >
| >
| > == BEGIN getenforce ==
| >
| > Enforcing
| >
| > == END   getenforce ==
| >
| >
| >
| > == BEGIN rpm -qa kernel\* | sort ==
| >
| > kernel-2.6.32-358.18.1.el6.x86_64
| >
| > kernel-2.6.32-358.el6.x86_64
| >
| > kernel-firmware-2.6.32-358.18.1.el6.noarch
| >
| > == END   rpm -qa kernel\* | sort ==
| >
| >
| >
| > == BEGIN lspci -nn ==
| >
| > 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host 
| > Bridge [1022:9601]
| >
| > 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 
| > PCI to PCI bridge (int gfx) [1022:9602]
| >
| > 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 
| > PCI to PCI bridge (PCIE port 1) [1022:9605]
| >
| > 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
| >
| > 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
| >
| > 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0 USB OHCI1 Controller [1002:4398]
| >
| > 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
| >
| > 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
| >
| > 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0 USB OHCI1 Controller [1002:4398]
| >
| > 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
| >
| > 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 
| > SMBus Controller [1002:4385] (rev 3c)
| >
| > 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
| >
| > 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
| > SBx00 Azalia (Intel HDA) [1002:4383]
| >
| > 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
| >
| > 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI
| > SBx00
| > PCI to PCI Bridge [1002:4384]
| >
| > 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
| > SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
| >
| > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
| > Processor HyperTransport Configuration [1022:1200]
| >
| > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
| > Processor Address Map [1022:1201]
| >
| > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
| > Processor DRAM Controller [1022:1202]
| >
| > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
| > Processor Miscellaneous Control [1022:1203]
| >
| > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h 
| > Processor Link Control [1022:1204]
| >
| > 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices 
| > [AMD] nee ATI RS880 [Radeon HD 4200] [1002:9710]
| >
| > 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
| > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] 
| > (rev
| > 03)
| >
| > == END   lspci -nn ==
| >
| >
| >
| >
| >
| >
| >
| > _______________________________________________
| > CentOS mailing list
| > CentOS@xxxxxxxxxx
| > http://lists.centos.org/mailman/listinfo/centos
| >
| _______________________________________________
| CentOS mailing list
| CentOS@xxxxxxxxxx
| http://lists.centos.org/mailman/listinfo/centos
| 
| _______________________________________________
| CentOS mailing list
| CentOS@xxxxxxxxxx
| http://lists.centos.org/mailman/listinfo/centos
| 

--
James A. Peltier
Manager, IT Services - Research Computing Group Simon Fraser University - Burnaby Campus
Phone   : 778-782-6573
Fax     : 778-782-3045
E-Mail  : jpeltier@xxxxxx
Website : http://www.sfu.ca/itservices

“A successful person is one who can lay a solid foundation from the bricks others have thrown at them.” -David Brinkley via Luke Shaw _______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos





[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux