Re: Intel 10G X520-2 and iscsi storage poor performance

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Am 27.09.13 17:39, schrieb John Doe:
> From: Götz Reinicke - IT Koordinator <goetz.reinicke@xxxxxxxxxxxxxxx>
> 
>> we have a storageserver (Centos 6.4) with a dualport Intel 10G X520-2
>> Adapter.
>>
>> A QSan P600Q-D316 Storage is configured with 8*SATA Drives raid 5 for
>> test, connected trought a Cisco UCS 6100 Series Fabric
>> Interconnect 10G Switch.
>>
>> I formated the storage with ext4 defaults, one volume and got r/w rates
>> about 10MB/s some up to 40MB/s .... VERY POOR....
> 
> Maybe have a look at:
>  http://downloadmirror.intel.com/14687/eng/readme.txt
> There are some performance tuning sections...

Thanks JD for that link; I was hoping that someone already found some
basic tunig suggestions, so that I dont have to reinvent the wheel.

	cheers . Götz

--
Götz Reinicke
IT-Koordinator

Tel. +49 7141 969 82 420
Fax  +49 7141 969 55 420
E-Mail goetz.reinicke@xxxxxxxxxxxxxxx

Filmakademie Baden-Württemberg GmbH
Akademiehof 10
71638 Ludwigsburg
www.filmakademie.de

Eintragung Amtsgericht Stuttgart HRB 205016

Vorsitzender des Aufsichtsrats: Jürgen Walter MdL
Staatssekretär im Ministerium für Wissenschaft,
Forschung und Kunst Baden-Württemberg

Geschäftsführer: Prof. Thomas Schadt

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux