Jerry Geis wrote: > I am attempting to setup a dell inspirons 1200 laptop > media accelerator 900 from intel is the chipset so I am using the i810 > driver. > In the default 1024x768 everything is fine. > > I am trying to setup the external port not the LCD to be 1366x768. > I added a modeline to xorg.conf of: > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "LCD Panel 1600x1200" > HorizSync 31.5 - 90.0 > VertRefresh 60.0 - 60.0 > ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 > 806 -hsync -vsync > ModeLine "1024x768" 54.2 1024 1048 1184 1344 768 771 777 > 806 -hsync -vsync > ModeLine "1366x768" 85.5 1366 1494 1624 1798 768 770 776 > 795 -hsync +vsync > Option "dpms" > EndSection > > There is a line in the log file of: > (II) I810(0): Monitor0: Using hsync range of 31.00-70.00 kHz > (II) I810(0): Monitor0: Using vrefresh range of 50.00-85.00 Hz > (II) I810(0): Not using mode "1366x768" (no mode of this name) > (II) I810(0): Not using built-in mode "1600x1200" (width too large for > virtual size) > (II) I810(0): Not using built-in mode "1280x1024" (width too large for > virtual size) > (1366x768,Monitor0) mode clock 100000MHz exceeds DDC maximum 110MHz > (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 110MHz > (II) I810(0): 6632 kBytes additional video memory is required to > > I looked at the specs of the media 900 and it does something like > 25XXx10XX > > What am I not setting up correctly to see the 1366x768? > > THanks so much, > > Jerry I had a similar problem trying to set 1400x1050 on a Siemens Fujitsu Laptop. The fix for me, was to use 915 resolution from http://www.geocities.com/stomljen/ as it seems the Intel video bios has a limited set of resolution modes Hope this helps Dean