Re: How to make a network interface come up automatically on link up?

[Joakim Ziegler <joakim@xxxxxxxxxxxxxx>]

This seems really dirty. :)

Also, I actually have to take it down and back up to make it work 
currently. But I will try the recipe I got soon and see if that fixes it.

-- 
Joakim Ziegler  -  Supervisor de postproducción  -  Terminal
joakim@xxxxxxxxxxxxxx   -   044 55 2971 8514   -   5264 0864

On 23/04/13 5:09, Carl T. Miller wrote:
> On 04/23/2013 05:25 AM, John Doe wrote:
>> From: Joakim Ziegler <joakim@xxxxxxxxxxxxxx>
>>
>>> As I'd mentioned before, the problem isn't that the interface doesn't
>>> come up on boot, it does, but since it's a point to point interface,
>>> when I reboot the computer on the other end, it goes down and doesn't
>>> come back up automatically. That is, link going down and up makes the
>>> network configuration stay down, I have to manually take the interface
>>> down and back up to make it work again.
>>
>> Not the solution you want but, as a last resort, you could always have a
>> cron script that checks every minute if the link is down...
>
> Or consider putting "* * * * * /sbin/ifup eth2" in root's crontab.  If
> eth2 is up, it simply rereads the configs (which haven't changed).  If
> it was down, it brings it up.
>
> c
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos