Re: Help with thread Centos 6.4 won't reboot on install

[m.roth@xxxxxxxxx]

Robert Benjamin wrote:
> On 3/27/2013 1:04 PM, Les Mikesell wrote:
>> On Wed, Mar 27, 2013 at 8:07 AM, Robert Benjamin <benjie1@xxxxxxx>
>> wrote:
>>>> If you can log in and use an editor in character mode you can fix it.
>>>>    The change needed in /etc/sysconfig/network-scripts/ifcfg-eth0 will
<snip>
>>> won't install on reboot. Post number 27 or 28 lists the output I got
>>> from FAQ2 above from cat /etc /sysconfig/network-scripts/ifcfg-eth0  My
>>> guess is the most important line there is ONBOOT=yes Anyway, there are
>>> suggestions in the forum which I will follow and then post the results
>>> back to the forum. Thanks again.
>> Yes, the ONBOOT=yes is already there.   However, some of the other
>> parts of that thread make me think that your network interface
>> actually comes up but you are not getting a DHCP address or the DHCP
>> server supplies a DNS server address that does not work.   These would
>> usually be supplied by your internet router.  Are you confident that
>> it is set up correctly?
<snip>
Quick question - I missed the very beginning: what does ethtool eth0 show?
Is there a link? Or does this have em1?

       mark

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos