Re: How to make a network interface come up automatically on link up?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Sat, 2013-03-23 at 20:27 -0600, Joakim Ziegler wrote:
> I have a recently installed Mellanox VPI interface in my server. This is 
> an InfiniBand interface, which, through the use of adapters, can also do 
> 10GbE over fiber. I have one of the adapter's two ports configured for 
> 10GbE in this way, with a point to point link to a Mac workstation with 
> a Myricom 10GbE card.
> 
> I've configured this interface on the Linux box (eth2) using 
> /etc/sysconfig/network-scripts/ifcfg-eth2 , setting its IP address, MTU, 
> subnet, etc.
> 
> Everything seems to work fine, with a single exception. If I reboot the 
> Mac on the other end, causing the link state of the fiber interface to 
> bounce, the network interface on the Linux box doesn't come back up when 
> the link comes back up. That is, ifconfig shows it as having the link 
> up, but it doesn't do the equivalent of "ifup eth2" when the link comes 
> back, so it doesn't get an IP, the routing table doesn't get updated, etc.
> 
> So, my question is, how can I make CentOS automatically configure this 
> interface when the link comes back up? It's a bit annoying having to log 
> in and do ifup eth2 every time...
> 

Joakim,

Do you have ONBOOT=yes in the /etc/sysconfig/network-scripts/ifcfg-eth2?
-- 


Kind Regards
Earl Ramirez
GPG Key: http://trinipino.com/PublicKey.asc

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux